We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal 130mm AC axial fan with two-wire lead

Zyvpee

Zyvpee A2S130-AB03-11 M2S052-CA 130mm 230V AC axial case fan

SKU CH-3A2D-F0F1C

130 mm AC axial case fan with dual ball bearings, IP44 rating and 230 V 50/60 Hz operation at 2500–2999 RPM

  • TypeAC axial fan
  • Fan Size130mm
  • Bearing Type2 Ball
  • RPM2500-2999 RPM
  • Power Connector2 Wires
  • ColorBlack
  • 130 mm AC axial fan fits standard case mounts
  • 230 V 50/60 Hz single-phase power runs from mains supply
  • Dual ball bearing rated for continuous 2500–2999 RPM operation
  • IP44 Class B enclosure resists dust and splashes
  • Black metal housing with two-wire lead for simple wiring

130 mm 230 V AC axial case fan

The Zyvpee A2S130-AB03-11 is a 130 mm AC axial fan designed for equipment that runs directly from 230 V mains power. It targets system integrators and maintenance teams who need a robust airflow device without a separate low-voltage supply. The two-wire connection simplifies wiring in industrial enclosures or server chassis.

IP44 rated with 50/44 W power draw

Operating at 50/60 Hz the fan draws 50 W at 50 Hz and 44 W at 60 Hz while spinning between 2500 and 2999 RPM. The IP44 rating and Class B insulation protect against splashing water and dust ingress, making it suitable for harsh environments. Dual ball bearings support continuous duty cycles where sleeve bearings would wear prematurely.

Replaces legacy 130 mm AC fans

This unit serves as a direct drop-in replacement for older 130 mm AC axial fans that use a two-wire mains lead and the same mounting footprint. The upgrade is worthwhile when the existing fan has developed bearing noise, reduced airflow, or lacks the IP44 ingress protection required by a new installation specification.

Highlights

  • 130 mm AC axial fan fits standard case mounts
  • 230 V 50/60 Hz single-phase power runs from mains supply
  • Dual ball bearing rated for continuous 2500–2999 RPM operation
  • IP44 Class B enclosure resists dust and splashes
  • Black metal housing with two-wire lead for simple wiring

Specifications

SeriesA2S130-AB03-11
ModelA2S130-AB03-11
TypeAC axial fan
Fan Size130mm
Bearing Type2 Ball
RPM2500-2999 RPM
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesAC Axial Fan

Questions about this item

Will the 130mm 230V AC fan fit the same mounting holes as my existing 130mm AC fan?

Yes, the 130mm frame matches the standard 130mm square mounting pattern used by most AC axial fans, so existing screw holes line up.

How can I confirm the fan is running at the rated 2500-2999 RPM after installation?

Power the unit and listen for steady airflow; a tachometer or motherboard fan header reading 2500-2999 RPM confirms correct operation.

Does the box include a power cord or connector for the 2-wire lead, or must I supply my own?

Only the fan with its two flying leads is included; a mains plug, IEC connector or terminal block must be sourced separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.