Zyvpee
Zyvpee A2D210-AA14-15 M2D068-CF 210mm 3-phase 400V AC axial industrial cooling fan
210 mm three-phase 400 V AC axial fan with IP44 protection and Class F insulation
- TypeAC axial fan
- Bearing Type2 Ball
- RPM2500-2999 RPM
- Power Connector4 Wires
- ColorBlack
- LEDNon-LED
- 3-phase 400 V operation suits industrial power systems
- IP44 rating protects against splashing water and solid particles
- Class F insulation withstands higher winding temperatures
- Dual ball bearings extend service life in continuous duty
- 210 mm metal frame fits standard axial fan cut-outs
Industrial three-phase axial fan
The Zyvpee A2D210-AA14-15 is a 210 mm AC axial fan built for three-phase 400 V supply at 50 or 60 Hz. It suits engineers specifying forced-air cooling in cabinets, enclosures or machinery where a compact metal impeller is required.
Sustained thermal performance
Rated IP44 and insulation Class F, the fan maintains continuous operation at 0.14 A on 50 Hz and 0.15 A on 60 Hz. Dual ball bearings support a speed range of 2500 to 2999 RPM under constant load without the degradation seen in sleeve-bearing designs.
Upgrade path and fit
The four-wire lead simplifies replacement of older three-phase units that lack a dedicated ground or tachometer wire. The jump is worthwhile when the existing mount accepts a 210 mm frame and the application demands IP44 ingress protection.
Highlights
- 3-phase 400 V operation suits industrial power systems
- IP44 rating protects against splashing water and solid particles
- Class F insulation withstands higher winding temperatures
- Dual ball bearings extend service life in continuous duty
- 210 mm metal frame fits standard axial fan cut-outs
Specifications
| Series | M2D068-CF |
|---|---|
| Model | A2D210-AA14-15 |
| Type | AC axial fan |
| Bearing Type | 2 Ball |
| RPM | 2500-2999 RPM |
| Power Connector | 4 Wires |
| Color | Black |
| LED | Non-LED |
| Features | AC Axial Fan |
| Dimensions | 210mm |
Questions about this item
What noise and heat level should I expect from the 2500-2999 RPM motor running continuously?
The fan operates at 2500-2999 RPM with a 2-ball bearing design. It draws 0.14 A at 50 Hz and 0.15 A at 60 Hz on a 400 V three-phase supply. The IP44-rated metal housing and Class F insulation are built for sustained industrial duty.
What external wiring or controls are needed to run this three-phase 400 V AC axial fan?
The unit has a 4-wire power connector for direct three-phase 400 V AC connection at 50/60 Hz. No onboard speed controller or drive electronics are included; you must provide a suitable three-phase supply and any required motor protection or switching gear.
Will the 210 mm mounting footprint and 4-wire lead match the cut-out and harness on my existing ebmpapst M2D068 series bracket?
The fan shares the 210 mm diameter and M2D068-CF series designation, so the mounting pattern aligns with other fans in that series. The 4-wire lead carries the three phases and earth; verify your existing harness uses the same phase order before connecting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
