Zyvpee
Zyvpee 4715KL-04W-B30 120mm 12038 38mm 2 Ball Bearing Case Fan
A 120 mm case fan with 38 mm depth, dual ball bearings and a two-wire 12 V 0.72 A connection
- TypeCPU Cooler Fan
- Bearing Type2 Ball
- Power Connector2 Wires
- ColorBlack
- LEDNon-LED
- FeaturesPower Case Fan
- 120 mm x 38 mm frame fits standard 120 mm mounts
- 12 V DC at 0.72 A draws minimal power
- 2 ball bearing design extends operational lifespan
- 2 wire connector simplifies installation
- Non LED black finish keeps build clean
Zyvpee 4715KL-04W-B30 120 mm CPU Cooler Fan
The Zyvpee 4715KL-04W-B30 is a 120 mm square case fan with a 38 mm thick frame. It uses a two-ball bearing and runs on DC 12 V at 0.72 A through a two-wire power connector. The unit is black and has no LED lighting.
Suited for builds needing a thick 120 mm
This fan fits systems that specify a 12038 form factor and a two-wire 12 V supply. It is not for builders who require PWM speed control or a three- or four-pin header. Buyers needing a slimmer profile or addressable lighting should look at other models.
Key spec is the 38 mm frame depth
The 38 mm thickness decides whether the fan clears the heatsink or chassis opening in your build. Verify that your mounting points and surrounding components accept this exact depth before ordering.
Highlights
- 120 mm x 38 mm frame fits standard 120 mm mounts
- 12 V DC at 0.72 A draws minimal power
- 2 ball bearing design extends operational lifespan
- 2 wire connector simplifies installation
- Non LED black finish keeps build clean
Specifications
| Brand | Zyvpee |
|---|---|
| Series | 4715KL-04W-B30 |
| Model | 4715KL-04W-B30 |
| Type | CPU Cooler Fan |
| Bearing Type | 2 Ball |
| Power Connector | 2 Wires |
| Color | Black |
| LED | Non-LED |
| Features | Power Case Fan |
| Dimensions | 120*38MM |
Questions about this item
What voltage and current does the 4715KL-04W-B30 2-wire connector draw?
The fan runs on DC12V and draws 0.72A through its two-wire power connector.
Will the 120 mm by 38 mm frame fit my case or CPU cooler mounting holes?
The 120*38 mm dimensions match standard 120 mm mounting patterns, but verify your bracket clearance for the 38 mm thickness.
How do I install the 2-wire fan correctly, and what is the common wiring mistake?
Connect the two wires to a 12 V DC source observing polarity; reversing the wires will prevent the fan from spinning.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



