We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Zyvpee

Zyvpee 414J 40x25mm 24V 2.3W 95mA 2 Ball Bearing 2-Wire Case Fan

SKU CH-50BE-S5HBA

A 40×25 mm case fan running at 24 V with dual ball bearings and a 30–35 dBA noise rating

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Noise Level30 - 35 dBA
  • Power Connector2 wires
  • ColorBlack
  • Quiet 30-35 dBA operation for low-noise builds
  • Dual ball bearing for extended service life
  • 24 V 2.3 W draws minimal power
  • Compact 40x25 mm fits tight spaces
  • Two-wire DC power for simple install

Compact 24 V axial fan for tight enclosures

The Zyvpee 414J is a 40 by 25 millimetre DC case fan rated at 24 volts and 2.3 watts. Its two ball bearings and 95 milliamp draw suit industrial chassis, inverter coolers or any small enclosure that supplies a 24 volt rail.

Suits builds with a 24 volt supply

The 30 to 35 dBA output fits noise-sensitive racks, but the fixed two-wire connector gives no PWM control and no tachometer signal. Buyers who need variable speed, speed monitoring or a different voltage rail must choose a different model.

24 volt 2.3 watt rating is the deciding spec

Verify that the target system delivers exactly 24 volts DC and can spare 2.3 watts on the fan header; the fan will not start reliably at lower voltages and has no adapter for other rails.

Highlights

  • Quiet 30-35 dBA operation for low-noise builds
  • Dual ball bearing for extended service life
  • 24 V 2.3 W draws minimal power
  • Compact 40x25 mm fits tight spaces
  • Two-wire DC power for simple install

Specifications

Series414J
Model414J
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Noise Level30 - 35 dBA
Power Connector2 wires
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions40*25mm

Questions about this item

How loud is the 414J fan when it runs continuously at 24 V?

The 414J produces 30 to 35 dBA, a level comparable to a quiet office, so it stays unobtrusive during all-day operation.

What power source must I already have to run this 24 V 2-wire fan?

You need a 24 V DC supply capable of at least 95 mA, such as a dedicated fan header or an external adapter with a two-pin connector.

Will the 40×25 mm 414J fit the same mounting holes as my older 40 mm case fan?

Yes, the 40 mm square frame matches the standard 40 mm mounting pattern, so it drops into existing screw holes without modification.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.