Zyvpee
Zyvpee 3110KL-04W-B49 E52 80mm 25mm 12V .26A 3-pin ball bearing case fan
80 mm ball-bearing case fan with 3-pin 12 V 0.26 A power for CPU cooling
- TypeCase Fan
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- FeaturesCPU Cooling
- Ball bearing reduces friction for longer life
- 12 V 0.26 A draws little power from the PSU
- 80 mm x 25 mm fits standard 8025 mount points
- 3-pin connector enables motherboard speed monitoring
- Non-LED black frame keeps the build clean
Zyvpee 80 mm ball-bearing case fan
The Zyvpee 3110KL-04W-B49 is an 80 mm by 25 mm case fan designed for CPU cooling in compact builds. It runs on 12 V DC at 0.26 A and uses a three-pin power connector for direct motherboard or controller attachment. The black, non-LED frame suits systems where lighting is not required.
Three-pin installation and ball-bearing longevity
Mounting uses standard 80 mm screw holes, so the fan fits most chassis and heatsinks without adapters. The three-pin connector supplies power and tachometer feedback but does not support PWM speed control. Ball bearings reduce friction compared with sleeve types, though they can develop audible whine after extended high-speed operation.
Airflow capacity for small-form-factor cooling
At 80 mm diameter and 25 mm thickness the fan delivers enough static pressure for low-profile CPU coolers and tight case vents. It handles typical office or home-theatre workloads where thermal loads stay modest. In high-density gaming rigs or overclocked configurations the limited airflow and fixed voltage become bottlenecks, requiring larger or PWM-controlled alternatives.
Highlights
- Ball bearing reduces friction for longer life
- 12 V 0.26 A draws little power from the PSU
- 80 mm x 25 mm fits standard 8025 mount points
- 3-pin connector enables motherboard speed monitoring
- Non-LED black frame keeps the build clean
Specifications
| Brand | Zyvpee |
|---|---|
| Series | 3110KL-04W-B49 E52 |
| Model | 3110KL-04W-B49 |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling |
| Dimensions | 80*25MM |
Questions about this item
How do I confirm the fan is spinning correctly after installation?
The fan should rotate smoothly when powered at 12 V and draw approximately 0.26 A; a steady 3-pin signal confirms proper operation.
What comes in the box and what must be purchased separately?
The package contains the 80 mm × 25 mm ball-bearing fan with a 3-pin connector; mounting screws and any fan controller are not included.
Which version should I choose for a standard 80 mm case mount?
The 3110KL-04W-B49 E52 model matches an 8025 form factor, 12 V 0.26 A rating and 3-pin interface for direct replacement.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



