We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 3-pin case fan with 12VDC .26A rating

Zyvpee

Zyvpee 12035GE-12M-YT 12VDC .26A 3-pin case fan

SKU CH-H1ZA-7X5G8

12 VDC case fan with a 3-pin connector and 0.26 A draw for system cooling

  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 VDC power for stable operation
  • 26 A draw keeps energy use low
  • Three-pin connector fits standard headers
  • Non-LED black design suits subtle builds
  • Refrigeration-grade cooling for reliable airflow

Zyvpee 12035GE-12M-YT 12VDC fan

The Zyvpee 12035GE-12M-YT is a 12VDC case fan drawing .26A through a standard three-pin connector. It suits builders who need a simple replacement cooler for a chassis or industrial enclosure. The non-LED black frame keeps the appearance neutral inside any build.

Replaces noisy or failed three-pin coolers

Swap this unit in when an existing three-pin fan develops bearing noise or stops spinning entirely. The jump is worth it if the current cooler matches the 12035 form factor and 12VDC .26A power envelope. Systems requiring PWM speed control or higher airflow ratings will not benefit from this model.

Limited to fixed-speed three-pin operation

The three-pin interface provides power and tachometer feedback but lacks PWM duty-cycle control. Motherboard headers can only vary voltage to change speed, which offers a narrower range than four-pin PWM. Builds that demand precise thermal curves or silent low-RPM operation should consider a different interface.

Highlights

  • 12 VDC power for stable operation
  • 26 A draw keeps energy use low
  • Three-pin connector fits standard headers
  • Non-LED black design suits subtle builds
  • Refrigeration-grade cooling for reliable airflow

Specifications

Series12035GE-12M-YT
Model12035GE-12M-YT
Power Connector3 Pin
ColorBlack
LEDNon-LED

Questions about this item

Will the 3-pin connector on this 12035GE-12M-YT fit a standard motherboard fan header?

Yes, the three pins match the common 12 V motherboard header; align the guide tab with the slot and press straight down until seated.

What is the installation step people often miss with this 12 VDC .26A fan?

After mounting with four screws, connect the 3-pin plug to the CPU_FAN or SYS_FAN header so the BIOS can monitor speed; leaving it unplugged defeats speed reporting.

When should the bearings in this 12035GE-12M-YT be relubricated or the unit replaced?

The sleeve-bearing design runs quietly at first; if audible rattling or speed drop appears after extended use, replace the fan rather than relubricate.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.