We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 2.5 inch enclosure with a green and red LED indicator

ZTC

ZTC ZTC-EN007 2.5" mSATA to SATA drive enclosure

SKU CH-QVVB-F1JGK MPN ZTC-EN007

Converts half or full-size mSATA SSDs to 2.5-inch SATA with 520 MB/s read speed and 6.0 Gb/s interface

  • Size2.5"
  • Internal InterfacemSATA
  • External InterfaceSATA
  • Connect any mSATA SSD to a SATA port
  • Read speeds reach 520 MB/s for fast data access
  • Fits standard 2.5″ 9.5 mm drive bays
  • Green and red LEDs show power and activity status
  • Built-in short-circuit and thermal shutdown protection

Converts mSATA SSD to 2.5" SATA

This adapter board fits any half-size or full-size mSATA solid-state drive into a standard 2.5-inch 9.5 mm form factor. The mSATA device connects to a desktop or laptop SATA port and appears as a new partition. No extra driver is required and the drive can be used as a bootable volume on both PC and Mac systems.

Ideal for repurposing mSATA modules.

Users who own an mSATA SSD gain a direct path to a SATA interface without cable clutter. Builders who already have a 2.5-inch SATA SSD do not need this enclosure because it accepts only the mSATA form factor. Systems lacking a free SATA data port or 2.5-inch bay cannot use the adapter.

SATA 6.0 Gbit/s interface with 520 MB/s read

The board supports SATA revision 3.2 and delivers sequential read speeds up to 520 MB/s. A green LED shows power status while a red LED indicates drive activity. Onboard protection includes short-circuit prevention, in-rush current suppression, thermal shutdown and ESD HBM 2 kV rating.

Highlights

  • Connect any mSATA SSD to a SATA port
  • Read speeds reach 520 MB/s for fast data access
  • Fits standard 2.5″ 9.5 mm drive bays
  • Green and red LEDs show power and activity status
  • Built-in short-circuit and thermal shutdown protection

Specifications

Size2.5"
Internal InterfacemSATA
External InterfaceSATA

Questions about this item

What size mSATA SSD can I install in this 2.5" enclosure?

The enclosure accepts both half-size and full-size mSATA SSDs, so either form factor will fit and connect to the internal mSATA interface.

Will this adapter let my older SATA 3.2 motherboard recognise the mSATA drive at full speed?

Yes, the board is compliant with SATA Rev. 3.2 and supports the DEVSLP function, allowing a compatible host to communicate with the mSATA SSD at up to 6.0 Gb/s.

How do I confirm the enclosure is powered and the drive is active after I connect it?

A green LED shows the mSATA SSD power status and a red LED shows its activity status, giving immediate visual confirmation of correct operation.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.