Zoro Select
Zoro Select ZUSA-RES-110 Compression Packing Seal 100 ft
Ceramic-fibre compression packing seal, 100 ft long, 1/2 in square cross-section, rated to 2,300 °F with 75 lb/cu ft density
- Seals uneven surfaces with flexible ceramic fiber
- Withstands 2,300 degrees F maximum temperature
- 100 foot roll provides extended sealing length
- 75 lb per cubic foot dense material
- Square half inch profile fits packing glands
Product Identity
The Zoro Select ZUSA-RES-110 is a ceramic fiber compression packing seal supplied in a 100 ft length with a 1/2 in square cross-section. It is designed for maintenance teams and plant engineers who need a high-temperature gasket material that conforms to uneven flange surfaces.
Setup Checks
Verify that the joint design accepts a 1/2 in square packing and that the operating temperature does not exceed 2,300 Degrees F. Confirm the media compatibility suits ceramic fiber and that the 75 lb/cu ft density matches the required compression load for the specific pump or valve stuffing box.
Bundle Impact
The product ships as a continuous 100 ft coil, allowing technicians to cut exact lengths for each stuffing box without waste. The flexible square profile simplifies installation around shafts and rods, reducing downtime during repacking procedures compared to pre-formed rings.
Highlights
- Seals uneven surfaces with flexible ceramic fiber
- Withstands 2,300 degrees F maximum temperature
- 100 foot roll provides extended sealing length
- 75 lb per cubic foot dense material
- Square half inch profile fits packing glands
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What comes in the box and do I need any extra tools or fittings?
The roll contains 100 ft of 1/2 in square ceramic-fibre compression packing; no additional components or tools are included.
The listing shows only one size — how do I know this thickness and length suit my application?
The seal is 1/2 in thick and supplied in a single 100 ft roll; choose it when your gland requires that cross-section and you can cut the needed length on site.
What does the 2,300 °F temperature rating mean when the seal is installed in service?
The ceramic-fibre material withstands continuous heat up to 2,300 °F while the 75 lb/cu ft density keeps the packing flexible enough to conform to uneven surfaces.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



