We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear reinforced polyurethane tubing coil, 100 ft length

Zoro Select

Zoro Select ZUSA-HT-518 NSF 61 Reinforced Polyurethane Tubing 1/4" ID x 3/8" bathware

SKU CH-1512-MFXER

Clear reinforced polyurethane tubing rated NSF 61 for beverage, food and water use, 1/4 in. ID x 3/8 in. OD, 200 psi at 160 °F, 100 ft coil

  • ColorClear
  • TypePipes, Valves & Fittings
  • NSF 61 certified for safe potable water contact
  • Shore A 90 hardness resists abrasion and kinking
  • 200 psi rating handles demanding pressure applications
  • Operates up to 160 °F for hot water lines
  • 100 ft continuous length reduces fitting joints

Zoro Select NSF 61 tubing for beverage

Zoro Select ZUSA-HT-518 is clear reinforced polyurethane tubing built for beverage, food and water applications. It carries NSF 61 certification and meets the demands of potable-fluid transfer in commercial and residential settings. The tubing suits installers who need a flexible, abrasion-resistant line that stays clear for visual inspection.

Upgrade from non-certified or lower-pressure tubing

The jump is worth it when the system requires NSF 61 compliance and a 200 psi pressure rating at up to 160 Degrees F. Shore A 90 hardness gives a stiffer wall that resists kinking and wear better than softer, unrated alternatives. It replaces plain polyurethane or vinyl lines that lack third-party certification for drinking-water contact.

Fits standard 1/4" ID push-to-connect

The 1/4 in inside diameter and 3/8 in outside diameter match common quick-connect and compression fittings without adapters. Supplied in a 100 ft coil, it frees you from splicing shorter lengths and reduces potential leak points. No jacket means a slimmer profile for tight routing, though peristaltic pump use is not supported.

Highlights

  • NSF 61 certified for safe potable water contact
  • Shore A 90 hardness resists abrasion and kinking
  • 200 psi rating handles demanding pressure applications
  • Operates up to 160 °F for hot water lines
  • 100 ft continuous length reduces fitting joints

Specifications

BrandZORO SELECT
ColorClear
TypePipes, Valves & Fittings

Questions about this item

What fitting size matches the 1/4 in inside diameter and 3/8 in outside diameter?

Use fittings rated for 1/4 in ID and 3/8 in OD tubing; the tube has a Shore A 90 hardness and 200 psi maximum operating pressure.

How do I cut and secure the 100 ft roll without kinking the polyurethane?

Cut squarely with a sharp tube cutter, slide the fitting fully onto the 1/4 in ID, and clamp; do not use heat or solvent cement.

When should I replace the tubing given the 160 Degrees F and 200 psi ratings?

Replace if the clear wall yellows, stiffens, shows surface cracks, or if pressure and temperature regularly approach the 200 psi and 160 Degrees F limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.