Usa Sealing
ZORO SELECT ZUSA-HT-2980 Clear PVC Tubing Trap
Clear PVC tubing rated for food, beverage and water use at up to 15 psi and 140 °F
- ColorClear
- Clear tubing lets you monitor flow at a glance
- Shore A 65 hardness gives semi-flexible handling for tight routing
- Rated to 15 psi for low-pressure beverage and water lines
- Withstands 140 °F for hot liquid transfer
- Five-foot length suits bench-top or portable setups
Clear PVC Tubing for Fluid Transfer
This clear PVC tubing measures 5 ft in overall length with a 3/4 in inside diameter and 1 in outside diameter. It is rated for beverage, food and water applications and carries a Shore A 65 hardness rating. The semi-flexible construction suits peristaltic pump setups as well as general fluid handling.
Build Quality and Daily Use
The material withstands a maximum operating temperature of 140 Degrees F and a maximum operating pressure of 15 psi. Its transparent wall lets operators visually confirm flow and spot blockages without disassembly. The tubing ships in a straight 5 ft length that can be cut to fit custom routing requirements.
Compatibility and Practical Limits
Peristaltic pump compatibility is confirmed, while PEX-type connections are not applicable. The product is not suited for high-pressure hydraulic lines or steam service beyond the stated temperature ceiling. Buyers needing longer continuous runs or higher pressure ratings should seek alternative specifications.
Highlights
- Clear tubing lets you monitor flow at a glance
- Shore A 65 hardness gives semi-flexible handling for tight routing
- Rated to 15 psi for low-pressure beverage and water lines
- Withstands 140 °F for hot liquid transfer
- Five-foot length suits bench-top or portable setups
Specifications
| Color | Clear |
|---|---|
| Brand | ZORO SELECT |
Questions about this item
What is the maximum operating pressure for the 3/4 in ID clear PVC tubing?
The tubing is rated for a maximum operating pressure of 15 psi, which limits its use to low-pressure fluid transfer applications.
What are the exact inside and outside diameters needed for fittings?
The tubing has a 3/4 in inside diameter and a 1 in outside diameter, so fittings must match these dimensions for a secure seal.
How do I properly install this semi-flexible tubing on barbed fittings?
Warm the tubing slightly to increase flexibility, push it fully over the barbs until it seats against the fitting base, and secure with clamps to prevent leaks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



