We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zoro Select 4 inch rubber swivel stem caster with zinc plated steel frame

Zoro Select

Zoro Select Swivel Stem Caster Rubber 4 in 115 lb accessory

SKU CH-79SF-FSZSB

Swivel stem caster with 4 in rubber wheel, 115 lb load rating and 7/16 in x 1-29/32 in stem

  • Swivel stem allows full directional movement
  • Rubber tread provides quiet floor protection
  • 115 lb load rating supports light equipment
  • 4 inch wheel diameter rolls over small obstacles
  • Steel frame with zinc plating resists corrosion

4 in Swivel Stem Caster 115 lb

This Zoro Select swivel stem caster has a 4 in rubber wheel and a 115 lb load rating. The steel frame is zinc plated and the stem measures 7/16 in x 1-29/32 in with a friction ring. Mounting height is 4 5/8 in.

Indoor light duty carts not outdoor or heavy loads

Suits light duty carts and fixtures on smooth indoor floors where a 115 lb rating per caster is sufficient. Not for applications that exceed 115 lb per caster or that require non-marking wheels. Not for rough surfaces or outdoor use where larger wheels or higher capacity are needed.

115 lb load rating decides fit

The single specification that decides fit is the 115 lb load rating; each caster supports up to 115 lb so the total capacity depends on the number of casters used. Confirm the stem size 7/16 in x 1-29/32 in matches the mounting hole before ordering.

Highlights

  • Swivel stem allows full directional movement
  • Rubber tread provides quiet floor protection
  • 115 lb load rating supports light equipment
  • 4 inch wheel diameter rolls over small obstacles
  • Steel frame with zinc plating resists corrosion

Specifications

BrandZORO SELECT

Questions about this item

What stem size and mounting height does this 4 in rubber caster need to fit?

The caster uses a 7/16 in x 1-29/32 in friction-ring stem and sits at a 4 5/8 in mounting height.

How do you install the friction-ring stem correctly?

Push the stem into the socket until the ring snaps fully into the groove; the step people miss is not seating the ring completely.

When should the rubber wheel be replaced?

Replace the wheel when the rubber tread shows cracking, flat spots, or wear that reduces the 115 lb load rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.