Zoro Select
Zoro Select Standard Duty Tarp 10 x 30 ft 10 Mil Tan Polyethylene
Standard duty polyethylene tarp measuring 10 by 30 feet with brass grommets every 24 inches, mildew and tear resistant
- TypeCanopies, Coverings & Outdoor Structures
- Size19.000
- 10 x 30 ft coverage for large areas
- 10 mil polyethylene resists tears and mildew
- Brass grommets every 24 in for secure tie-downs
- 8 oz/sq yd fabric balances strength and handling
- UV-resistant tan finish reduces sun damage
Standard Duty Tarp 10 x 30 ft
This polyethylene tarp measures 10 by 30 feet with a 10 mil thickness. It is built for general outdoor covering tasks where heavy-duty reinforcement is not required. Brass grommets are spaced every 24 inches along the reinforced edges. The tan colour provides low glare in bright conditions.
Sustained outdoor exposure
The material resists mildew, tearing and UV degradation during extended use. Single-stitched seams and web-reinforced edges hold together under wind flap and repeated tension. No waterproof coating is applied, so moisture can penetrate during prolonged rain. Breathable fabric allows air movement to reduce condensation build-up underneath.
Brass grommets and reinforced edges
Brass grommets resist corrosion better than plain steel when left outside for weeks. The 24-inch spacing lets you secure the tarp with standard bungee cords or rope without adding extra tie-down points. Web reinforcement distributes pull forces across the hem rather than concentrating stress at a single hole. Finished dimensions match the cut size at 10 by 30 feet.
Highlights
- 10 x 30 ft coverage for large areas
- 10 mil polyethylene resists tears and mildew
- Brass grommets every 24 in for secure tie-downs
- 8 oz/sq yd fabric balances strength and handling
- UV-resistant tan finish reduces sun damage
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Canopies, Coverings & Outdoor Structures |
| Size | 19.000 |
Questions about this item
How much wind load and UV exposure can the 10 mil polyethylene handle during all-day outdoor use?
The 10 mil thickness, 5.8 oz/sq yd fabric weight, and UV-resistant coating are rated for standard-duty protection against sun and moderate wind.
What tie-down hardware is needed to secure the brass grommets spaced every 24 inches?
You will need rope, bungee cords, or zip ties that fit through the brass grommets placed every 24 inches along the perimeter.
Will the single-stitched seams and tan color match my existing canopy frame and cover set?
The tarp has single-stitched, web-reinforced seams and a neutral tan finish that coordinates with most standard-duty canopy frames and older covers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
