We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular Viton O-rings, pack of 50

Zoro Select

Zoro Select Square Profile Viton O-Ring Dash 010 PK50

SKU CH-XB07-VPG8N

Pack of 50 Viton O-rings with rectangular cross-section, dash 010 size, rated from -15 to 400 degrees F

  • Viton material withstands -15 to 400 degrees F
  • Square profile ensures consistent seal in rectangular grooves
  • Dash 010 size matches standard hardware specifications
  • Pack of 50 rings covers multiple maintenance jobs
  • Medium-hard 75A durometer resists extrusion under pressure

Square Profile Viton O-Ring Dash 010

This pack contains 50 black Viton O-rings with a square cross-section. Each ring has a nominal inside diameter of .2 inch and a nominal width of .07 inch. The material is rated at durometer 75A and withstands temperatures from -15 to 400 degrees F. They are metal detectable but not X-ray detectable and are not FDA compliant.

Sealing components for static inch-sized grooves

These O-rings suit maintenance teams and engineers who need a rectangular-profile seal in dash 010 dimensions for oil, fuel or high-temperature service. Buyers who require a round cross-section, a different dash size, FDA-compliant material or X-ray detectable rings should look at other listings.

Durometer 75A Viton temperature rating

The single specification that decides fit is the 75A durometer combined with the -15 to 400 degree F range, which determines whether the seal will survive the intended fluid and heat conditions.

Highlights

  • Viton material withstands -15 to 400 degrees F
  • Square profile ensures consistent seal in rectangular grooves
  • Dash 010 size matches standard hardware specifications
  • Pack of 50 rings covers multiple maintenance jobs
  • Medium-hard 75A durometer resists extrusion under pressure

Specifications

BrandZORO SELECT

Questions about this item

Should I choose the square-profile Viton O-ring in dash 010 or another dash size for my seal?

Select dash 010 when the groove calls for a nominal 1/4 in inside diameter and 1/16 in cross-section; the actual dimensions are .2 in ID, .07 in width and .379 in OD.

What does the 75A durometer mean once the ring is installed in a hydraulic cylinder?

The medium-hard 75A rating resists extrusion at system pressures typical for dash 010 grooves while still conforming to the rectangular groove corners.

Does the rectangular cross-section and Viton material limit the temperature or pressure range in service?

The square profile and Viton compound are rated for continuous use from -15 to 400 degrees F; pressure capability follows the dash 010 groove design rather than the ring alone.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.