Zoro Select
Zoro Select PVC Tubing Yellow 1/8" ID x 3/16" OD 10 ft
Yellow PVC tubing for beverage, food, fuel and water lines, 10 ft long with 1/8 in. ID and 3/16 in. OD
- ColorYellow
- Yellow PVC tubing suited for fuel, beverage and water lines
- 1/8 in inside diameter and 3/16 in outside diameter for precise fit
- Shore A 55 hardness resists hardening and swelling over time
- Meets 3-A and FDA standards for food-contact safety
- 10 ft coil length covers multiple routing needs
Tubing for Fuels and Lubricants
This yellow PVC tubing handles beverage, food, fuels and water applications. It measures 1/8 in inside diameter by 3/16 in outside diameter across a 10 ft length. The material carries 3-A and FDA standards for sanitary use.
Thermals Noise and Power Draw
Maximum operating temperature reaches 150 degrees F while maximum operating pressure is rated at 20 psi. Shore A hardness of 55 provides hardening resistant and swelling resistant performance. Wall thickness measures .03 in for consistent flow.
Upgrade From Basic Hose
Replaces generic vinyl or rubber hose that lacks FDA or 3-A compliance for food and beverage lines. The jump is worth it when sanitary standards or fuel and lubricant compatibility are required. Not for buyers who need higher pressure ratings or larger diameter flow paths.
Highlights
- Yellow PVC tubing suited for fuel, beverage and water lines
- 1/8 in inside diameter and 3/16 in outside diameter for precise fit
- Shore A 55 hardness resists hardening and swelling over time
- Meets 3-A and FDA standards for food-contact safety
- 10 ft coil length covers multiple routing needs
Specifications
| Color | Yellow |
|---|---|
| Brand | ZORO SELECT |
Questions about this item
How do I install the 1/8 in ID PVC tubing onto barbed fittings without kinking the .03 in wall?
Warm the yellow tubing in hot water to soften the Shore A 55 material, push it fully over the barb until it seats against the fitting shoulder, then secure with a hose clamp; avoid sharp bends near the connection.
When should I replace this 10 ft fuel and lubricant line?
Replace the tubing if the yellow PVC shows surface cracking, hardening beyond the original Shore A 55 feel, swelling, or any leakage at the 20 psi working pressure.
What is the first limit reached during continuous hot-fluid service at 150 Degrees F?
The 20 psi maximum operating pressure is the primary limit; sustained use at the 150 Degrees F temperature rating reduces pressure capacity, so stay below 20 psi.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



