Champion Power Equipment
Champion Power Equipment C90018 generator cover grey 2000 series
- Generators
$18.99
0.00022483BTC
In stock
Zoro Select
Zoro Select Pressure Washer Nozzle 5.5 15 Fan PK5
A set of five identical stainless-steel fan nozzles sized 5.5 with a 15-degree spray angle, rated to 5,000 psi and delivering up to 6.15 gpm at maximum pressure
- Consistent spray pattern with 15-degree fan angle
- Handles up to 5000 psi maximum pressure
- Stainless steel construction resists corrosion and wear
- Five identical nozzles included for quick replacement
- Delivers 4.76 gpm at 3000 psi for efficient cleaning
Zoro Select Pressure Washer Nozzle 5.5 15 Fan PK5
This set supplies five identical stainless-steel spray nozzles rated for 5,000 psi maximum pressure. Each nozzle has a 1/4-inch male NPT inlet and a 15-degree fan spray angle. The pack is designed for operators who need quick replacements on commercial or residential pressure washers.
Five identical nozzles in one package
The bundle delivers five matching tips so a worn or clogged nozzle can be swapped without interrupting the job. Identical flow characteristics across the set mean spray pattern and pressure stay consistent from nozzle to nozzle. Stainless-steel construction resists corrosion during repeated chemical or water exposure.
Flow rates from 800 to 5,000 psi
At 800 psi the nozzle flows 2.46 gpm, rising to 6.15 gpm at the 5,000 psi limit. The 5.5 orifice size provides predictable output across the documented pressure range. Units requiring higher flow or wider spray angles will need a different nozzle specification.
Highlights
- Consistent spray pattern with 15-degree fan angle
- Handles up to 5000 psi maximum pressure
- Stainless steel construction resists corrosion and wear
- Five identical nozzles included for quick replacement
- Delivers 4.76 gpm at 3000 psi for efficient cleaning
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
How often should the 5.5 size stainless steel fan nozzles be replaced under regular use?
The stainless steel construction resists wear from high-pressure water, so replacement depends on orifice erosion rather than a fixed schedule. Inspect the 15-degree spray pattern periodically; replace the nozzle when flow exceeds the rated GPM for your operating pressure.
At what pressure does the 5.5 orifice reach its maximum rated flow of 6.15 gpm?
The nozzle delivers 6.15 gpm at the maximum rated pressure of 5,000 psi. Flow increases steadily with pressure: 5.5 gpm at 4,000 psi, 5.14 gpm at 3,500 psi, and 4.76 gpm at 3,000 psi.
Does the 1/4 inch NPT inlet connection loosen or leak during extended high-pressure operation?
The 1/4 inch male NPT thread is a standard tapered pipe thread that seals mechanically under pressure. Proper installation with thread sealant prevents loosening or leaks during sustained use at up to 5,000 psi.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
