We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Zoro Select

Zoro Select O-Ring Viton Brown 3/8 in 3/32 in PK50

SKU CH-A5ZR-C8CPH

Viton O-rings rated to 400 °F, 3/8 in inside diameter, 3/32 in cross-section, pack of 50

  • Viton material withstands -15 °F to 400 °F
  • Medium-hard 75A durometer resists extrusion under pressure
  • FDA-approved compound suits food and pharmaceutical contact
  • Pack of 50 covers multiple sealing points
  • Dash 110 sizing matches standard groove dimensions

Zoro Select Viton O-Ring 3/8 Inch ID

These brown Viton O-rings have a 3/8 inch nominal inside diameter and a 3/32 inch cross-section. They suit automotive and industrial sealing tasks needing chemical and heat resistance. The pack contains fifty pieces for maintenance or assembly work.

Simple press fit into standard grooves

Installation requires seating the ring evenly in the gland without twisting or stretching. The 75A durometer material resists compression set but can be nicked by sharp edges during assembly. Lubricate with compatible fluid to avoid damage.

Temperature range -15 to 400 degrees F

This continuous operating range decides if the seal survives your fluid and environment. The Viton compound handles oils, fuels and high heat within these limits. FDA approved material suits food or pharmaceutical contact needs.

Highlights

  • Viton material withstands -15 °F to 400 °F
  • Medium-hard 75A durometer resists extrusion under pressure
  • FDA-approved compound suits food and pharmaceutical contact
  • Pack of 50 covers multiple sealing points
  • Dash 110 sizing matches standard groove dimensions

Specifications

BrandZORO SELECT

Questions about this item

How can I confirm the O-rings are sealing correctly after installation?

Check that the joint holds pressure within the -15 to 400 °F temperature range and that no fluid leaks past the 0.3 in inside diameter and 0.103 in cross-section.

What is included in the package and what must be purchased separately?

The pack contains 50 brown Viton O-rings sized to dash 110; lubricant, installation tools and any mating hardware are not included.

Which dash-number size should I select for a 3/8 in nominal bore?

Choose dash 110, which provides a 0.3 in actual inside diameter, 0.103 in actual width and 0.568 in actual outside diameter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.