We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black FFKM O-ring 5/32 in inside diameter 1/16 in cross section

Zoro Select

Zoro Select O-Ring 5/32 in 1/16 in FFKM Black ZUSADC75007

SKU CH-T97G-KJ65X

FFKM O-ring with 5/32 in inside diameter, 1/16 in width, 75A durometer and 30 to 600 °F temperature range

  • FFKM material withstands 30 to 600 degrees F
  • 75A durometer gives medium-hard sealing performance
  • Actual 0.1 in ID and 0.07 in width ensure precise fit
  • Dash 007 size standardised for easy replacement
  • Black colour aids visual inspection during assembly

O-Ring FFKM 5/32 in Black

This Zoro Select O-Ring uses FFKM material with a 75A durometer rating for chemical resistance. The nominal inside diameter is 5/32 in and the nominal width is 1/16 in. Actual dimensions measure .1 in inside diameter and .07 in width. The black seal operates from 30 to 600 degrees F.

Dash 007 Dimensions and Compliance

Dash number 007 identifies this size in standard references. The actual outside diameter is .285 in with a nominal outside diameter of 9/32 in. The product is not metal detectable and not X-ray detectable. It is not FDA compliant for food contact.

Verify Groove and Media Compatibility

Confirm the groove dimensions match the actual inside diameter of .1 in and width of .07 in before ordering. Check that the 30 to 600 degrees F range covers the intended service temperature. Ensure the FFKM material is compatible with the specific chemicals in the application.

Highlights

  • FFKM material withstands 30 to 600 degrees F
  • 75A durometer gives medium-hard sealing performance
  • Actual 0.1 in ID and 0.07 in width ensure precise fit
  • Dash 007 size standardised for easy replacement
  • Black colour aids visual inspection during assembly

Specifications

BrandZORO SELECT

Questions about this item

Should I choose the 5/32 in inside diameter or the 9/32 in outside diameter for my groove?

The nominal inside diameter is 5/32 in and the nominal outside diameter is 9/32 in; select the size that matches the groove specification you are sealing against.

What does the 75A durometer mean once the O-ring is installed?

A 75A durometer gives a medium-hard feel that resists extrusion under pressure while still conforming to the groove surface.

How does the FFKM material limit the temperature range in practice?

The FFKM compound is rated for continuous service from 30 to 600 degrees F, so it handles both sub-zero starts and high-heat cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.