We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Zoro Select

Zoro Select O-Ring 3/4 in 1/16 in Viton Brown PK50

SKU CH-671F-E1EB4

Pack of 50 Viton O-rings rated for -15 to 400 degrees F with 3/4 inch inside diameter

  • Viton material withstands -15 to 400 degrees F
  • FDA approved for food and pharmaceutical contact
  • 3/4 inch inside diameter fits standard fittings
  • Pack of 50 reduces reorder frequency
  • Brown colour simplifies visual identification

O-Ring 3/4 in Viton Brown PK50

Zoro Select supplies a pack of fifty Viton O-rings with a nominal inside diameter of 3/4 in and a cross-section width of 1/16 in. The brown seals carry a 75A durometer rating and an operating temperature range of -15 to 400 degrees F. They are FDA approved and marked as metal detectable but not X-ray detectable.

Suits fluid sealing up to 400 °F

These rings suit maintenance teams needing medium-hard Viton seals for hydrocarbon or chemical service at temperatures up to 400 °F. Buyers who need a different inside diameter, a softer or harder durometer, or a non-detectable compound should look at other listings.

Nominal inside diameter 3/4 in

The nominal inside diameter of 3/4 in is the single specification that decides fit. Verify the groove dimensions against the actual inside diameter of .7 in and actual width of .07 in before ordering.

Highlights

  • Viton material withstands -15 to 400 degrees F
  • FDA approved for food and pharmaceutical contact
  • 3/4 inch inside diameter fits standard fittings
  • Pack of 50 reduces reorder frequency
  • Brown colour simplifies visual identification

Specifications

BrandZORO SELECT

Questions about this item

Should I choose the pack of 50 or a different quantity for the 3/4 in Viton O-rings?

The listing supplies a single pack of 50 brown Viton O-rings with 3/4 in nominal inside diameter and 1/16 in cross-section.

What does the 75A durometer mean once the O-ring is installed?

A 75A durometer gives a medium-hard feel that resists extrusion while still conforming to the groove under normal hydraulic or pneumatic pressure.

How does the inch-based dash-018 standard limit the groove dimensions I can use?

Dash-018 fixes the nominal inside diameter at 3/4 in and cross-section at 1/16 in, so the groove must match those inch-series dimensions for a proper seal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.