Zoro Select
Zoro Select NSF 61 Reinforced Polyurethane Tubing 1/4" ID x 3/8" Clear 10 ft
Clear reinforced polyurethane tubing, NSF 61 certified for beverage, food and water, handles 200 psi at 160 °F, 10 ft length
- ColorClear
- TypePipes, Valves & Fittings
- NSF 61 certified for safe drinking-water contact
- Withstands 200 psi working pressure for demanding supply lines
- Operates up to 160 °F in hot-water service
- Abrasion-resistant polyurethane extends service life
- 10 ft coil ready to cut to exact length
Zoro Select NSF 61 Tubing for Beverage
This reinforced polyurethane tube is certified to NSF 61 for contact with beverage, food and water. It measures ten feet long with a clear wall so flow can be inspected visually. The material carries a Shore A 90 hardness rating for stiffness and abrasion resistance.
Quarter Inch Bore Handles 200 psi at 160 Degrees F
The quarter inch inside diameter and three eighths outside diameter give a strong wall that holds up to 200 psi at 160 degrees Fahrenheit. It is not rated for peristaltic pump use and has no outer jacket, so external abrasion protection must be provided by the installer if the tube runs against rough surfaces.
Replaces Uncertified Clear Vinyl or Rubber Lines
Builders upgrading from uncertified clear vinyl or rubber tubing gain documented NSF 61 compliance and higher temperature headroom. The jump is worth it when local codes demand NSF 61 or when the fluid temperature regularly exceeds the limits of standard vinyl hose.
Highlights
- NSF 61 certified for safe drinking-water contact
- Withstands 200 psi working pressure for demanding supply lines
- Operates up to 160 °F in hot-water service
- Abrasion-resistant polyurethane extends service life
- 10 ft coil ready to cut to exact length
Specifications
| Brand | ZORO SELECT |
|---|---|
| Color | Clear |
| Type | Pipes, Valves & Fittings |
Questions about this item
Will the 1/4 in inside diameter and 3/8 in outside diameter match the barbed fittings I already use for water lines?
The tubing has a 1/4 in inside diameter and a 3/8 in outside diameter, so it fits standard barbed fittings made for those dimensions.
How can I verify the tubing handles the 200 psi rating once installed?
Pressurise the system to its normal working pressure and inspect every connection for leaks; the reinforced polyurethane wall is rated for 200 psi maximum operating pressure.
Does the 10 ft coil come with any clamps or fittings, or must I buy them separately?
The package contains only the 10 ft length of clear polyurethane tubing; clamps, barbs or other fittings are not included and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



