Zoro Select
Zoro Select M16250.060.0001 Wing Nut M6-1.00 Steel Zinc Plated
M6 wing nut with crescent wings for tool-free tightening, cold-forged steel with zinc plating to BS 856
- TypeNuts
- Tool-free adjustment with crescent wings
- M6-1.00 metric thread fits standard bolts
- Cold-forged Class 4 steel for reliable strength
- Zinc-plated finish resists corrosion
- Conforms to BS 856 dimensional standard
Zoro Select M6 Wing Nut
The Zoro Select M16250.060.0001 is a metric wing nut designed for hand tightening in general hardware and automotive tasks. Its crescent wings provide grip for tool-free installation and removal. The steel body carries a zinc-plated finish for corrosion resistance. This non-locking fastener suits temporary or frequently adjusted assemblies.
Thread specification M6x1.00
The single critical specification is the M6x1.00 thread size, which must match the mating bolt or stud exactly. It conforms to dimensional standard BS 856 and material quality standard BS 856 CF. The thread is a cold-forged, Class 4 metric coarse pitch. Verifying this pitch and diameter against the host hardware is the only way to confirm fit.
Capacity for light-duty clamping
The wing nut handles light clamping loads typical of Class 4 steel fasteners in non-critical joints. Maximum wing span reaches 26 51/64 mm for leverage, while overall height is 12.9 mm and base diameter is 12 mm. It runs out when joint tension exceeds the proof load of Class 4 material or when a locking feature is required to resist vibration loosening.
Highlights
- Tool-free adjustment with crescent wings
- M6-1.00 metric thread fits standard bolts
- Cold-forged Class 4 steel for reliable strength
- Zinc-plated finish resists corrosion
- Conforms to BS 856 dimensional standard
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Nuts |
Questions about this item
How much clearance does the 12.9 mm overall height add above the joint?
The nut stands 12.9 mm tall overall, so it adds that height above the fastened surface.
What does the BS 856 standard cover for this M6 wing nut?
BS 856 defines the dimensions and material quality for this cold-forged Class 4 steel nut.
Will the 26 51/64 mm wing span clear my fixture?
The crescent wings span 26 51/64 mm tip-to-tip; check that space against your mounting hole pattern.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
