We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Zoro Select

Zoro Select E3600 Light Kit 8 ft 10A 18/3

SKU CH-WQ4S-1B0Y3

An 8 ft, 10 A SJO rubber power cord with NEMA 5-15P plug and bare leads for 125 V AC equipment

  • 8 ft reach powers equipment across the workspace
  • NEMA 5-15P plug fits standard 125 V outlets
  • 10 A rating handles common tool loads
  • SJO rubber jacket resists oil and 32–194 °F temperatures
  • 18/3 conductors deliver three-wire grounding safety

Zoro Select E3600 Power Cord 8 ft

This 8 ft power cord supplies 125 V AC at up to 10 A through an 18 AWG three-conductor SJO rubber jacket. It terminates in a NEMA 5-15P plug with bare leads for direct wiring. The cord operates from 32 to 194 °F and meets California Proposition 65 requirements.

Installing the cord and common issues

Strip the bare leads and connect them to your device terminals following the equipment wiring diagram. The round 0.32 in diameter jacket fits standard strain-relief clamps. Problems usually arise from loose terminal screws, reversed polarity or exceeding the 10 A rating.

Checks before ordering

Verify that your equipment accepts a NEMA 5-15P plug and operates at 125 V AC. Confirm the 10 A maximum covers your load and that the 8 ft length reaches the outlet without tension. Ensure the operating environment stays within the 32 to 194 °F range.

Highlights

  • 8 ft reach powers equipment across the workspace
  • NEMA 5-15P plug fits standard 125 V outlets
  • 10 A rating handles common tool loads
  • SJO rubber jacket resists oil and 32–194 °F temperatures
  • 18/3 conductors deliver three-wire grounding safety

Specifications

BrandZORO SELECT

Questions about this item

How can I confirm the cord is delivering power correctly after I connect it?

Plug the NEMA 5-15P end into a 125 V AC outlet and verify the connected equipment operates normally; the cord is rated for 10 A maximum current.

What comes in the box and do I need any extra parts to use it?

The package contains the 8 ft SJO power cord with bare-lead ends; no additional components are required for a standard connection.

Which wire gauge and conductor count should I select for a 10 A load?

The cord uses 18 AWG wire with three conductors, matching the 10 A rating for this 8 ft length.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.