We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pack of ten black Buna-N O-rings dash 246

Zoro Select

Zoro Select Buna-N O-Ring Dash 246 PK10

SKU CH-HHRF-PPWE2

Pack of ten Buna-N O-rings with dash number 246, 4.4 in inside diameter and 0.139 in cross-section, rated for -40 to 250 °F

  • FDA-compliant Buna-N material resists oils and fuels
  • Metal-detectable design aids contamination control in food lines
  • Withstands -40 °F to 250 °F for wide thermal range
  • Pack of 10 O-rings covers multiple seal points
  • Dash 246 size fits 4.4 in ID grooves

O-Ring Dash 246 Ten Pack

The Zoro Select Buna-N O-Ring Dash 246 comes in a pack of ten for sealing tasks that require a 4.4 inch inside diameter and 0.139 inch cross-section. Maintenance teams and repair shops use these black rings where a medium-hard 50A durometer material is specified.

Capacity And Temperature Headroom

The rings operate from minus 40 degrees up to 250 degrees Fahrenheit and meet FDA compliance for incidental food contact. They are metal detectable but not X-ray detectable, so they suit lines with magnetic inspection only. The nominal outside diameter is 4.762 inches.

Thermals Noise And Power In Normal Use

As static seals the rings draw no power and produce no noise during service. The Buna-N material resists compression set within the stated temperature window, maintaining seal integrity without active cooling or lubrication. Performance degrades outside the rated thermal range.

Highlights

  • FDA-compliant Buna-N material resists oils and fuels
  • Metal-detectable design aids contamination control in food lines
  • Withstands -40 °F to 250 °F for wide thermal range
  • Pack of 10 O-rings covers multiple seal points
  • Dash 246 size fits 4.4 in ID grooves

Specifications

BrandZORO SELECT

Questions about this item

Will the 4.4 in inside diameter O-rings seal properly on my existing 4 1/2 in nominal groove?

Yes, the actual 4.4 in inside diameter and 0.139 in width match the Dash 246 standard for a 4 1/2 in nominal groove, so they fit the same hardware you already use.

How can I confirm the 50A durometer Buna-N material is performing correctly after installation?

Check that the rings seat evenly without twisting, hold pressure across the -40 to 250 °F range, and show no extrusion or cracking during the first thermal cycles.

Does the PK10 pack include any lubricant or installation tools, or must I buy them separately?

The pack contains ten black Buna-N O-rings only; compatible lubricant and any sizing or installation tools are sold separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.