We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black polypropylene Schedule 80 pipe nipple with male NPT threads

Zoro Select

Zoro Select BANJO 3/4" MNPT x 4" TBE Polypropylene Pipe Nipple Sch 80

SKU CH-DG50-G1DG7

Chemical-resistant polypropylene pipe nipple with 3/4 inch male NPT threads and 150 psi rating

  • ColorBlack
  • Chemical-resistant polypropylene handles aggressive fluids
  • Schedule 80 wall rated for 150 psi working pressure
  • Operates reliably from 0 to 150 °F
  • 3/4 inch male NPT threads connect directly to fittings
  • Four-inch overall length suits tight piping runs

Zoro Select BANJO 3/4" Polypropylene Pipe Nipple

This Schedule 80 polypropylene nipple connects two female NPT fittings in non-potable water systems. The 3/4 inch nominal size and 4 inch overall length suit standard plumbing layouts. Black polypropylene construction resists a broad range of chemicals. Rated for 150 psi maximum operating pressure.

Verify Threads and Schedule Before Installing

Confirm both mating ports use NPT threads and accept Schedule 80 wall thickness. The 3/4 inch male NPT ends require matching female counterparts. Operating temperature must stay between 0 and 150 degrees F. Ensure the chemical environment is compatible with polypropylene material.

Sustained Pressure and Temperature Performance

The fitting maintains its 150 psi rating continuously within the 0 to 150 degrees F range. Polypropylene does not degrade under prolonged chemical exposure listed in the resistance data. Threaded joints stay sealed during extended service cycles. No performance drop occurs during long-term non-potable water flow.

Highlights

  • Chemical-resistant polypropylene handles aggressive fluids
  • Schedule 80 wall rated for 150 psi working pressure
  • Operates reliably from 0 to 150 °F
  • 3/4 inch male NPT threads connect directly to fittings
  • Four-inch overall length suits tight piping runs

Specifications

ColorBlack
BrandBANJO

Questions about this item

What comes in the box and do I need any extra fittings?

The package contains the 4-inch Schedule 80 polypropylene nipple with 3/4-inch male NPT threads on both ends. No gaskets, sealant or additional adapters are included.

When would I pick this Schedule 80 nipple instead of a lighter wall version?

Choose this Schedule 80 fitting when the system runs up to 150 psi at temperatures between 0 and 150 degrees F and chemical resistance is required.

How does the 150 psi rating hold up once the nipple is installed in a real piping run?

The 150 psi maximum operating pressure applies at the full 0 to 150 degrees F range, so the joint maintains that rating throughout normal service conditions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.