We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black polypropylene Schedule 80 pipe nipple with male NPT threads both ends

Zoro Select

Zoro Select BANJO 1" MNPT x 6" TBE Polypropylene Pipe Nipple Sch 80

SKU CH-KKJ7-T8NFY

Black polypropylene Schedule 80 pipe nipple with 1-inch male NPT threads and 6-inch length for chemical-resistant non-potable water lines up to 150 psi

  • ColorBlack
  • Chemical-resistant polypropylene handles aggressive fluids
  • Schedule 80 wall thickness rated for 150 psi
  • 1-inch male NPT threads connect to standard fittings
  • Six-inch length suits compact piping runs
  • Operates from 0 to 150 degrees F

BANJO 1" MNPT Polypropylene Nipple

This new Schedule 80 pipe nipple is made from chemical-resistant polypropylene and measures six inches overall. It carries 1 in male NPT threads on both ends and is rated for 150 psi at up to 150 °F. The black fitting is intended for non-potable water systems.

Suits chemical-resistant non-potable lines

Installers who need a lightweight, corrosion-proof nipple for aggressive fluids at 150 psi will find this part appropriate. It is not for potable water service, high-temperature steam, or applications that require metal strength or a different thread standard.

Schedule 80 pressure rating decides fit

The 150 psi maximum operating pressure at 150 °F is the single specification that determines whether this nipple meets the system design. Verify the required pressure class and temperature range before ordering.

Highlights

  • Chemical-resistant polypropylene handles aggressive fluids
  • Schedule 80 wall thickness rated for 150 psi
  • 1-inch male NPT threads connect to standard fittings
  • Six-inch length suits compact piping runs
  • Operates from 0 to 150 degrees F

Specifications

ColorBlack
BrandBANJO

Questions about this item

What thread size and schedule rating does this 6-inch nipple require for a leak-free fit?

The nipple has 1-inch male NPT threads on both ends and is built to Schedule 80 dimensions, so matching Schedule 80 female fittings are needed.

Which sealing method works on the tapered NPT threads without damaging the polypropylene?

Wrap PTFE tape clockwise on the male threads only; avoid pipe dope or excessive torque that can split the plastic body.

When should the nipple be replaced given its pressure and temperature limits?

Replace it if the system exceeds 150 psi or 150 °F, or if the black polypropylene shows cracking, chalking, or chemical attack.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.