We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight brass tube 3/32 inch outside diameter 12 inch length mill finish

Zoro Select

Zoro Select 8126 Brass Tubing 3/32 in OD 1 ft

SKU CH-0ASJ-T96G7

Brass tubing with 3/32 in outside diameter and 1 ft length for automotive, HVAC and plumbing

  • 260 brass alloy meets ASTM B135 and B587 standards
  • 3/32 in outside diameter fits precision automotive and HVAC lines
  • 014 in wall thickness balances strength with easy bending
  • 12 in length supplies ready-to-cut stock for small projects
  • Operates from 0 to 1,690 °F across plumbing and HVAC systems

Zoro Select 8126 Brass Tube 3/32 in OD

This Zoro Select 8126 brass round tube is a 12-inch length of 260 alloy with a 3/32 inch outside diameter and a 0.066 inch inside diameter. The 0.014 inch wall thickness provides structural rigidity for fluid conveyance. It meets ASTM B135 and ASTM B587 standards for quality assurance. The mill finish surface is suitable for automotive, HVAC, and plumbing applications.

Suitable Uses and Limits

Builders needing a short run of small-diameter brass tubing for low-pressure lines will find this 1-foot length convenient. The 260 alloy offers good corrosion resistance and formability for bending during installation. Operators requiring continuous lengths longer than 12 inches or larger bore sizes must source alternative tubing. The 1,690 °F maximum temperature rating supports high-heat environments.

Critical Specification

The 3/32 inch outside diameter is the primary dimension that determines fit with compression fittings and drilled passages. The 0.014 inch wall thickness defines the internal flow area and burst pressure capability. Verify both measurements against your system requirements before ordering. The 260 material grade dictates the mechanical properties and corrosion profile.

Highlights

  • 260 brass alloy meets ASTM B135 and B587 standards
  • 3/32 in outside diameter fits precision automotive and HVAC lines
  • 014 in wall thickness balances strength with easy bending
  • 12 in length supplies ready-to-cut stock for small projects
  • Operates from 0 to 1,690 °F across plumbing and HVAC systems

Specifications

BrandZORO SELECT

Questions about this item

What temperature range does the 260 brass tube handle?

The 260 brass tubing operates from 0 to 1,690 degrees Fahrenheit, covering typical automotive, HVAC and plumbing service temperatures.

What are the exact outside diameter and wall thickness of this tubing?

The tube has a 3/32 inch outside diameter and a 0.014 inch wall thickness, giving an inside diameter of 0.066 inch.

How do I cut and deburr the 12 inch brass tube without crushing the thin wall?

Use a fine-tooth tubing cutter, rotate gently to score, then deburr inside and out with a reamer so the 0.014 inch wall stays round for flaring or compression fittings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.