Video Mount Products
Video Mount Products ERRS1032-50 Rack Screws 50 Pack
- 0.43
$8.99
0.00010498BTC
In stock
Zoro Select
Zoro Select 6YB76 Pegboard Swing Panel 48x48in 475lb
A 48 by 48 inch pegboard swing panel with 16 square feet of storage, 475 lb capacity and a 56 inch swing radius
- Holds 475 lb for heavy tool organisation
- 16 sq ft storage area keeps items accessible
- 1 in peg spacing fits standard hooks
- 56 in swing radius allows full panel access
- Epoxy-coated hardwood resists wear in workshop conditions
48×48 Pegboard Swing Panel
The Zoro Select 6YB76 is a 48 inch by 48 inch pegboard swing panel built from epoxy-coated hardwood. It provides 16 square feet of storage area on one usable side with round peg holes spaced one inch apart. The panel supports a 475 lb load capacity for both the panel and the whole unit.
475 lb Load Under Continuous Use
The panel is rated for 475 lb across the entire unit and the panel itself, meaning the structure holds that weight without relying on a short-term burst rating. The hardwood core and epoxy coating resist sagging when hooks are fully loaded over time. A 56 inch swing radius must stay clear so the panel can open without binding under the sustained load.
Hardwood Panel Mounting Notes
The panel arrives unassembled and requires mounting hardware suited to the supporting wall or frame. The one-quarter inch overall depth means fasteners must anchor securely without splitting the hardwood. Installers should verify the 56 inch swing clearance before drilling, as obstructed motion is the most common reason the panel cannot be used after mounting.
Highlights
- Holds 475 lb for heavy tool organisation
- 16 sq ft storage area keeps items accessible
- 1 in peg spacing fits standard hooks
- 56 in swing radius allows full panel access
- Epoxy-coated hardwood resists wear in workshop conditions
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
How much wall clearance does the 56 in swing radius demand when the panel is fully open?
The panel swings through a 56 in radius, so you need at least that much clear space in front of the mounting surface for full travel.
What mounting hardware must I already have to secure the 48 in by 48 in hardwood panel?
The unit ships unassembled with no hooks or fasteners included; you supply the lag bolts or anchors rated for the 475 lb load capacity.
Will the 1 in peg spacing accept the standard hooks I already use on my older pegboard?
Yes, the 9/32 in round holes on 1 in centres match common pegboard hook dimensions, so existing hooks will fit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
