We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Zoro Select

Zoro Select 5CRC2 Poly Tubing 14 in x 2150 ft 2 mil Clear

SKU CH-MBYT-FAMK8

Clear poly tubing on a cored roll, 14 in wide by 2150 ft long, 2 mil thick, FDA-compliant LDPE rated from -60 to 180 °F

  • ColorClear
  • Clear poly tubing lets you see contents instantly
  • 14 in width fits a wide range of product sizes
  • 2 mil LDPE film resists tears down to -60 °F
  • FDA-compliant material approved for direct food contact
  • 2150 ft roll on a 3 in core reduces changeover frequency

Clear Poly Tubing for High-Volume Packaging

Zoro Select 5CRC2 poly tubing comes on a 2,150-foot cored roll that is 14 inches wide and 2 mil thick. The low-density polyethylene material is FDA compliant and stays flexible from -60°F to 180°F. It suits operations that cut custom bag lengths for bulky or irregular items.

Temperature Range and Material Behaviour

The LDPE construction withstands a minimum operating temperature of -60°F and a maximum of 180°F without losing seal integrity. At 2 mil thickness the film resists punctures during normal handling while remaining light enough for manual dispensing. No special climate control is required for storage.

Cored Roll Format and Compliance Notes

A 3-inch core and 12-inch roll diameter fit standard bag-sealing equipment and dispensers. The product carries California Proposition 65 warnings for chemicals linked to cancer and reproductive harm. Buyers needing pre-made bags or heavier-gauge film should consider alternative formats.

Highlights

  • Clear poly tubing lets you see contents instantly
  • 14 in width fits a wide range of product sizes
  • 2 mil LDPE film resists tears down to -60 °F
  • FDA-compliant material approved for direct food contact
  • 2150 ft roll on a 3 in core reduces changeover frequency

Specifications

BrandZORO SELECT
ColorClear

Questions about this item

How do I install the 14 in poly tubing on a 3 in core, and what step do people get wrong?

Slide the 12 in roll onto the 3 in core, then thread the 2 mil LDPE film through your heat sealer. The step most people miss is allowing the roll to reach room temperature first, otherwise the -60 °F to 180 °F rated material can stick or seal unevenly.

What maintenance or replacement will the 2150 ft roll need later?

The tubing itself is single-use; you replace it when the 2150 ft roll runs out. Keep the spare rolls stored flat, away from direct heat above 180 °F or cold below -60 °F, to prevent the LDPE from becoming brittle or blocking.

What limit shows up first under sustained high-volume sealing?

The 2 mil wall reaches its heat tolerance at 180 °F; continuous sealing cycles that push the jaws beyond that temperature will cause the film to melt or stick before the 2150 ft length is exhausted.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.