We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flexible 24 inch stainless steel water connector with brass FIP fittings on both ends

Zoro Select

Zoro Select 437024 Water Connector 24 in

SKU CH-384V-XNMYB

A 24-inch stainless-steel water connector with brass FIP fittings rated for 180 psi at 70 °F, designed for water-heater installations

  • TypePipes, Valves & Fittings
  • 24 in length suits tight water heater installs
  • 304 stainless steel hose resists corrosion at 180 psi
  • Brass FIP fittings on both ends ensure leak-free seal
  • Rated 40 to 180 °F for reliable hot water service
  • cUPC listed for code-compliant water heater connections

24-inch Water Connector for Heaters

This Zoro Select water connector is a coupled assembly built for water-heater hookups. It measures 24 in overall with 3/4 in FIP brass fittings on both ends. The hose tube and cover are 304 stainless steel rated for 180 psi at 70 °F and a temperature range of 40 to 180 °F. It meets cUPC standards and carries a Proposition 65 warning.

Suits standard heater hookups only

Installers needing a 24 in flexible link with 3/4 in female iron-pipe threads will find this part matches the spec. Builders who need a different length, a different thread size, or a non-stainless cover should look at other options. The fixed 24 in dimension and FIP-only ends limit use to that exact configuration.

180 psi working pressure at 70 °F

The single figure that decides fit is the maximum working pressure of 180 psi measured at 70 °F. Systems that operate above this pressure or outside the 40 to 180 °F range cannot use this connector safely. Verify your heater’s pressure and temperature ratings against this number before installing.

Highlights

  • 24 in length suits tight water heater installs
  • 304 stainless steel hose resists corrosion at 180 psi
  • Brass FIP fittings on both ends ensure leak-free seal
  • Rated 40 to 180 °F for reliable hot water service
  • cUPC listed for code-compliant water heater connections

Specifications

BrandZORO SELECT
TypePipes, Valves & Fittings

Questions about this item

What type of inlet connection does the 437024 water connector require on the supply line?

The connector has a 3/4 inch FIP inlet on both ends, so the supply line must provide a matching 3/4 inch male pipe thread.

Will the 180 psi maximum working pressure at 70 F handle a household system running at 125 psi?

Yes, the 180 psi rating at 70 F exceeds a 125 psi supply, giving a comfortable margin for normal water-heater pressure.

How can I confirm the stainless steel hose is seated correctly after installation?

Pressurise the system and check the brass FIP joints for leaks; a dry connection at 125 psi shows the 24 inch assembly is working as intended.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.