We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled black nylon tubing, 100 ft length, 1/8 inch outside diameter

Zoro Select

Zoro Select 2VDP1 Nylon Tubing 1/8" OD Black 100 ft

SKU CH-QKQ6-MAHEF

Nylon tubing with 1/8 inch outside diameter and 3/32 inch inside diameter rated for 267 psi at 68 degrees Fahrenheit

  • ColorBlack
  • Durable nylon construction resists wear in demanding plumbing applications
  • 100 ft continuous length reduces joints and potential leak points
  • 267 psi working pressure at 68°F supports high-pressure air or fluid lines
  • 175°F maximum operating temperature handles hot-water or heated-air systems
  • 3/32 in inside diameter suits precise low-flow metering and instrumentation needs

1/8 in OD nylon tubing for air lines

This 100 ft coil of black nylon tubing has a 1/8 in outside diameter and a 3/32 in inside diameter. It is rated for a maximum operating pressure of 267 psi at 68 degrees F and a maximum operating temperature of 175 degrees F. The Shore D 60 hardness gives it a firm feel suited to pneumatic circuits.

Sustained pressure and vacuum performance

The tubing withstands continuous pressure up to 267 psi at 68 degrees F and handles vacuum down to 28 in Hg without collapsing. Its temperature ceiling of 175 degrees F means it remains stable during extended compressor cycles. It is not rated for peristaltic pump use.

Simple push-fit installation

Cut the tube square with a sharp blade and push it into compatible 1/8 in OD fittings; no clamps or special tools are required. The rigid Shore D 60 wall resists kinking but can crack if bent tighter than its natural radius. Verify fitting compatibility before pressurising the system.

Highlights

  • Durable nylon construction resists wear in demanding plumbing applications
  • 100 ft continuous length reduces joints and potential leak points
  • 267 psi working pressure at 68°F supports high-pressure air or fluid lines
  • 175°F maximum operating temperature handles hot-water or heated-air systems
  • 3/32 in inside diameter suits precise low-flow metering and instrumentation needs

Specifications

ColorBlack
BrandZORO SELECT

Questions about this item

How much heat can the 1/8" OD nylon tubing handle during continuous use?

The tubing is rated for a maximum operating temperature of 175 Degrees F, making it suitable for sustained air-line runs at that temperature.

What fittings or tools are required to connect this 3/32" ID tubing?

You will need barbed or push-to-connect fittings sized for 1/8" outside diameter and 3/32" inside diameter, plus a clean cutter for the nylon material.

Will this Shore D 60 nylon tubing work with older brass compression fittings I already have?

Yes, standard brass compression fittings for 1/8" OD tubing will seal on the nylon, though the harder Shore D 60 material may need slightly more tightening force than softer vinyl.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.