Zoro Select
Zoro Select 2HGJ6 Wire Shelving 18D 60W 63H 4 Shelf Chrome 600lb
Adjustable chrome wire shelving unit, 18 in deep by 60 in wide by 63 in high, four shelves each holding 600 lb, NSF certified
- Holds heavy garage loads with 600 lb shelf capacity
- Adjusts in 1 in steps for custom tool layout
- Chrome steel resists corrosion in dry environments
- NSF certified for safety and quality standards
- 60 in width fits wide wall spaces easily
600 lb Shelf Capacity
This chrome wire shelving unit provides four adjustable shelves, each rated for 600 lb. The 60 in wide by 18 in deep footprint suits garage or workshop storage where heavy bins or equipment must be kept off the floor. Assembly uses the included posts and split-sleeve clips for tool-free height changes.
Split-Sleeve Adjustment
Steel construction with a chrome finish resists corrosion in dry environments. Shelves move in 1 in increments along the 63 in posts, allowing the unit to adapt as inventory changes. Two S-hooks are supplied for linking this add-on section to an adjacent starter unit, creating a continuous run without extra hardware.
NSF-Certified Dry Use
The unit carries NSF certification for dry locations only; it is not rated for wet or refrigerated areas. Total unit capacity reaches 2,000 lb when all four shelves are loaded evenly. California Proposition 65 warnings apply because the product contains chemicals identified by the state as causing cancer and reproductive harm.
Highlights
- Holds heavy garage loads with 600 lb shelf capacity
- Adjusts in 1 in steps for custom tool layout
- Chrome steel resists corrosion in dry environments
- NSF certified for safety and quality standards
- 60 in width fits wide wall spaces easily
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What standard does the shelving meet and what total load does it support?
The unit meets NSF standards and is rated for a total capacity of 2,000 lb across all four shelves.
What floor space and clearance are required to assemble this 60-inch-wide by 18-inch-deep unit?
You need a level area at least 60 in wide by 18 in deep with enough vertical clearance to stand the 63 in posts upright during assembly.
How do the split sleeves secure each shelf, and what common mistake should be avoided?
Split sleeves slide onto the 1 in adjustment grooves of each post; the shelf then rests on the sleeves. The frequent error is not seating both halves of every sleeve fully before loading the shelf.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
KINGSOM 907 Cordless Soldering Iron Kit 2-in-1 Corded Wireless 8s Heating 260-450°C 500-842°F
- Residential
Portable Soldering Iron USB-C Rechargeable 510 Thread 3-Level Temperature Black
- Residential



