We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black rubber dock bumper with eight mounting holes

Zoro Select

Zoro Select 26W593 Dock Bumper 30x12 3/4x4 1/2 in Rubber

SKU CH-3628-SKF18

Rubber dock bumper measuring 30 by 12 3/4 by 4 1/2 inches with eight bolt-on mounting holes

  • TypeWheelbarrows & Carts
  • Rubber construction absorbs impact to protect docks
  • 30 in height covers a tall vertical surface
  • 12 3/4 in width spans a broad contact area
  • 4 1/2 in depth provides a thick cushion layer
  • Eight bolt-on holes spaced 11 in and 8 in apart simplify mounting

Zoro Select 26W593 Dock Bumper

The Zoro Select 26W593 is a rectangular rubber dock bumper measuring 30 inches high, 12 3/4 inches wide and 4 1/2 inches deep. It is designed for marine or industrial environments where vessels or vehicles contact a fixed structure. The bumper absorbs impact to protect both the dock face and the approaching craft. It suits facility managers and boat owners needing a bolt-on solution.

Mounting pattern and hardware check

Before ordering, verify that the mounting surface can accept eight bolts through 13/16 inch diameter holes. The holes are spaced 11 inches on centre horizontally and 8 inches on centre vertically. Confirm the substrate material and thickness are adequate for the fastener length and load path. Ensure clearance exists behind the bumper for the bolt heads and washers.

Sustained impact absorption

Under repeated or prolonged contact the rubber body distributes load across its full 30 by 7 1/2 inch face and 4 1/2 inch depth. The material resists permanent deformation during continuous compression cycles typical of tidal movement or frequent docking. The bolt-on pattern transfers shear forces directly into the structure without relying on adhesive bonds that can fatigue over time.

Highlights

  • Rubber construction absorbs impact to protect docks
  • 30 in height covers a tall vertical surface
  • 12 3/4 in width spans a broad contact area
  • 4 1/2 in depth provides a thick cushion layer
  • Eight bolt-on holes spaced 11 in and 8 in apart simplify mounting

Specifications

BrandZORO SELECT
TypeWheelbarrows & Carts

Questions about this item

What does the Zoro Select 26W593 dock bumper include and what extra hardware is needed?

The bumper is a single rubber unit measuring 30 in high, 12 3/4 in wide and 4 1/2 in deep with eight 13/16 in mounting holes spaced 11 in on-centre width and 8 in on-centre height; bolts and anchors are not supplied.

Which dimensions should I check to match my dock layout?

Verify the overall 30 x 12 3/4 x 4 1/2 in footprint, the 7 1/2 in bumper face width, the 13/16 in hole diameter and the 11 in by 8 in bolt pattern before ordering.

How does the 30 in height perform once bolted to a dock?

The 30 in vertical face covers the full bumper height, absorbing impact along the entire 7 1/2 in wide rubber surface while the eight-bolt pattern distributes load evenly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.