Zoro Select
Zoro Select 1UKU3 Swivel Plate Caster Rubber 3 in 210 lb Black
Swivel plate caster with a 3-inch rubber wheel supports loads up to 210 lb
- Swivels freely for easy manoeuvring
- 210 lb load rating handles heavy equipment
- 3 inch rubber wheel rolls smoothly
- Plate mount installs on flat surfaces
- NSF listed for sanitary environments
3 in Swivel Plate Caster
This Zoro Select caster mounts on a flat plate and swivels freely for easy directional changes on carts or light equipment. It uses a single rubber wheel that rolls quietly on smooth floors and carries a rated load of 210 lb. The unit ships new and is listed by NSF for sanitation-sensitive environments.
210 lb load rating decides fit
The maximum capacity of 210 lb is the figure that determines whether this caster suits the intended cart or rack. Exceeding that limit risks wheel deformation or mounting failure, so the total weight on each caster must stay at or below the rated value. No brake or swivel lock is fitted, so the wheel will roll and turn without restraint.
Plate mount installs with four bolts
The top plate bolts directly to the frame using standard hardware, making installation straightforward for most maintenance teams. Because the caster has no brake or locking mechanism, the only common issue is unwanted movement on sloped surfaces, which must be managed by the equipment design rather than the caster itself.
Highlights
- Swivels freely for easy manoeuvring
- 210 lb load rating handles heavy equipment
- 3 inch rubber wheel rolls smoothly
- Plate mount installs on flat surfaces
- NSF listed for sanitary environments
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
How much weight can the 210 lb load rating actually carry on a cart?
Each caster supports up to 210 lb, so total capacity depends on the number of casters installed and how evenly the load is distributed across them.
What does the plate mounting pattern require for installation?
The caster uses a standard plate mount; you will need to drill or match the bolt-hole spacing on your equipment frame to secure it.
Will the 3 in rubber wheel fit in the available clearance on my equipment?
The wheel diameter is 3 in with a 1 1/4 in tread width, so check your frame height and fork space against those dimensions before mounting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



