We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray rectangular folding table 30 by 61 inches blow molded polyethylene top steel wishbone legs assembled

Zoro Select

Zoro Select 13V435 Rectangle Folding Table 30" W 61" L 29" H Blow Molded Gray

SKU CH-C5J4-540W2

A 61-inch by 30-inch blow-molded polyethylene rectangle table with a steel wishbone frame that supports 600 lb and ships assembled

  • TypeTables
  • ColorGray
  • Spacious 61" length fits large projects
  • Blow-molded polyethylene top resists spills and dents
  • Steel wishbone frame supports 600 lb loads
  • Ready to use with no assembly required
  • Compact folding design stores flat when not needed

Compact 30 × 61 in folding table

The Zoro Select 13V435 is a blow-molded polyethylene rectangle table that arrives fully assembled. Its 30-inch width and 61-inch length suit home offices, temporary workstations or light commercial use where a flat, neutral-gray surface is needed quickly.

Steel wishbone frame adds 600 lb capacity

The gray powder-coated steel wishbone legs lock open without tools and support a 600 lb distributed load. A 1 1/2 inch thick bullnose edge resists chipping, while the blow-molded top cleans with standard household products and requires no separate pads or hardware.

Check doorway width and floor protection

At 61 inches long the table may not pass through narrow interior doors without angling. Verify that the wishbone leg spread fits your available floor area and consider adding felt glides if the steel feet could mark delicate flooring.

Highlights

  • Spacious 61" length fits large projects
  • Blow-molded polyethylene top resists spills and dents
  • Steel wishbone frame supports 600 lb loads
  • Ready to use with no assembly required
  • Compact folding design stores flat when not needed

Specifications

TypeTables
BrandZORO SELECT
ColorGray

Questions about this item

How often does the steel wishbone frame need tightening or replacement?

The steel wishbone frame is assembled at the factory and requires no scheduled tightening or replacement under normal use.

What limits how long the 61-inch blow-molded polyethylene top can support its 600 lb rating continuously?

The 1 1/2-inch thick polyethylene top may gradually deflect under sustained maximum load, which becomes the practical limit before the frame yields.

Does the gray bullnose edge table get hot or noisy during all-day indoor use?

The polyethylene surface and steel frame stay at room temperature and produce no audible noise during continuous indoor use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.