We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow foam buffing pad 8 inch diameter hook and loop attachment

Zoro Select

Zoro Select 12U072 compound pad 8 in foam body repair tool

SKU CH-DMGN-J9QGN

Eight-inch foam buffing pad with hook-and-loop backing for cutting and compounding on a 6 1/2 inch backing plate

  • 8-inch foam pad fits 6.5-inch backing plates for broad tool compatibility
  • Hook-and-loop attachment enables quick pad changes during body repair work
  • Yellow foam construction designed for cutting and compounding applications on automotive surfaces
  • 5-inch thickness provides cushioning for even compound distribution across panels
  • California Proposition 65 warning indicates chemical content requiring user awareness

8-Inch Foam Compound Pad

The Zoro Select 12U072 is a yellow foam buffing pad designed for cutting and compounding tasks on automotive paintwork. It attaches via a hook-and-loop backing to a compatible 6 1/2 inch backing plate. Professional detailers and DIY restorers use it to remove oxidation, scratches and swirl marks. The pad measures eight inches in outside diameter and one and a half inches thick.

Hook-and-Loop Attachment for Rotary

The pad centres on a 6 1/2 inch backing plate, so the machine must accept that plate size and provide a hook-and-loop interface. No adhesive discs or bolt-on hardware are required, freeing up time during pad changes. The foam body conforms to curved panels while the hook-and-loop face stays secure under heat and pressure. Buyers who need a screw-on or adhesive-mounted pad cannot use this design.

Replaces Worn or Contaminated Cutting Pads

When an existing foam pad loses its cell structure, loads with dried compound or tears at the edge, this pad restores cutting efficiency without changing the backing plate. The upgrade is worth it when the old pad leaves holograms or fails to break down abrasives evenly. Detailers who require a finishing or polishing pad instead of a cutting pad should select a different foam density.

Highlights

  • 8-inch foam pad fits 6.5-inch backing plates for broad tool compatibility
  • Hook-and-loop attachment enables quick pad changes during body repair work
  • Yellow foam construction designed for cutting and compounding applications on automotive surfaces
  • 5-inch thickness provides cushioning for even compound distribution across panels
  • California Proposition 65 warning indicates chemical content requiring user awareness

Specifications

BrandZORO SELECT

Questions about this item

How long can the 8 in foam pad sustain cutting and compounding before the hook-and-loop attachment begins to slip?

The pad is built with a hook-and-loop backing designed for a 6 1/2 in backing plate; sustained cutting performance depends on the polisher speed and pressure applied.

Does the foam body generate noticeable heat during all-day compounding sessions?

Foam construction helps dissipate heat while cutting, but surface temperature will vary with machine speed, compound choice and operator technique.

What backing plate size must I already own to mount this 8 in yellow foam pad?

The pad requires a 6 1/2 in hook-and-loop backing plate for secure attachment to the polisher.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.