We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome-plated brass 1/4-turn water supply stop with compression connections

Zoro Select

Zoro Select 10756lf 1/4-Turn Brass Water Supply Stop 5/8 in Compression

SKU CH-NNY0-6C07X

A 1/4-turn brass shut-off valve with 5/8 in and 3/8 in compression ends rated to 150 psi

  • TypePipes, Valves & Fittings
  • Quarter-turn handle enables fast shut-off
  • Brass body with chrome plating resists corrosion
  • Dual 5/8 in and 3/8 in compression ports fit common supply lines
  • Rated for 150 psi operating pressure
  • Meets California Proposition 65 disclosure requirements

Zoro Select 1/4-Turn Brass Water Supply Stop

This Zoro Select 10756lf valve controls water flow to fixtures with a quarter-turn handle. It is built for residential or light-commercial plumbing where a positive shut-off is required. The chrome-plated brass body resists corrosion in typical supply-line environments.

Upgrade from multi-turn or gate-style stops

Replace older multi-turn valves that seize or leak at the packing nut over time. The 1/4-turn ball mechanism provides faster operation and longer seal life. The change is worth it when a supply stop must operate reliably after long periods of inactivity.

Verify 5/8 in and 3/8 in compression connections

Confirm the existing supply tubes match the 5/8 in female compression inlet and 3/8 in female compression outlet. Ensure system pressure does not exceed the 150 psi operating limit. Check local codes for any restrictions related to the Proposition 65 warning.

Highlights

  • Quarter-turn handle enables fast shut-off
  • Brass body with chrome plating resists corrosion
  • Dual 5/8 in and 3/8 in compression ports fit common supply lines
  • Rated for 150 psi operating pressure
  • Meets California Proposition 65 disclosure requirements

Specifications

BrandZORO SELECT
TypePipes, Valves & Fittings

Questions about this item

What pipe size does the 5/8 in compression inlet on the Zoro Select 10756lf water supply stop fit?

The 5/8 in compression inlet accepts 5/8 in OD copper or plastic tubing with a matching compression nut and ferrule.

How do you install the 1/4-turn brass stop, and what step is often missed?

Slide the compression nut and ferrule onto each tube, insert fully into the valve body, then tighten the nuts; the step often missed is fully seating the tube before tightening.

When should the internal cartridge or seat of this 150 psi brass stop be replaced?

Replace the cartridge or seat if the 1/4-turn handle no longer shuts off flow completely or if a drip appears at the outlet under normal 150 psi operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.