Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00910565BTC
In stock
Zoro Select
Zoro Select 1/2" FNPT Galvanized 90 Degree Elbow bathware
Galvanised steel 90-degree elbow with 1/2 inch FNPT threads for Schedule 160 piping
- ColorSilver
- TypePipes, Valves & Fittings
- Galvanized steel resists corrosion for long service life
- 90-degree elbow changes pipe direction in tight spaces
- 1/2 inch FNPT threads connect to standard fittings
- Class 3000 rating handles high-pressure systems
- Schedule 160 wall thickness adds mechanical strength
Galvanised 90° Elbow 1/2″ FNPT
This galvanised steel elbow redirects flow through a 90-degree turn in plumbing systems. The 1/2-inch female NPT threads accept matching male fittings on each side. It suits installers working with Schedule 160 pipe where a compact directional change is required. The A105 Class 3000 rating supports demanding pressure conditions.
Pressure rating and material performance
The fitting carries a Class 3000 designation for high-pressure service. Galvanised coating resists corrosion during normal water-supply operation. No moving parts mean silent performance and zero power consumption. The steel body maintains structural integrity across typical temperature ranges found in residential and commercial pipework.
Proposition 65 notice included
California Proposition 65 warnings advise that the product contains chemicals linked to cancer and reproductive harm. No additional accessories, sealants or software accompany the fitting. Installers must supply thread tape or compound separately to ensure leak-free joints. The single-piece construction requires no assembly before use.
Highlights
- Galvanized steel resists corrosion for long service life
- 90-degree elbow changes pipe direction in tight spaces
- 1/2 inch FNPT threads connect to standard fittings
- Class 3000 rating handles high-pressure systems
- Schedule 160 wall thickness adds mechanical strength
Specifications
| Brand | ZORO SELECT |
|---|---|
| Color | Silver |
| Type | Pipes, Valves & Fittings |
Questions about this item
How do I install the 1/2" FNPT galvanized elbow without damaging the A105 threads?
Apply PTFE tape or pipe dope to the male threads, hand-tighten the elbow, then finish with a wrench for one to two turns; overtightening strips the Class 3000 fitting.
Will the galvanized coating on this Schedule 160 elbow need replacement?
The zinc layer protects the steel until it is mechanically damaged or the water chemistry becomes aggressive; once white rust appears the fitting should be swapped out.
What pressure limit appears first when this 90-degree elbow runs continuously at 3000 class rating?
The Class 3000 rating is the design ceiling; sustained operation at or near that pressure will stress the threads and galvanised wall before any other component fails.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
