We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black dynamic microphone with metal grille and XLR connector, includes stand mount

Zoom ZDM-1 Dynamic Microphone XLR 135 dB SPL 78 dB SNR

SKU CH-CGHN-RK3DM

A dynamic XLR microphone with a supercardioid pattern, 135 dB SPL handling and 78 dB SNR for broadcast-quality podcasting and vocals

  • ColorBlack
  • ConnectorXLR
  • Microphone Sensitivity135 decibels
  • Microphone Signal to Noise Ratio(SNR)78 decibels
  • FeaturesStand
  • Broadcast-quality sound from large-diaphragm dynamic design
  • Supercardioid pattern rejects side noise for clean recordings
  • Handles 135 dB SPL without clipping or distortion
  • Internal shock mount isolates bumps and handling noise
  • All-metal body and grille built for daily use

Vocal Mic for Podcasting and Streaming

The Zoom ZDM-1 is a large-diaphragm dynamic microphone built for podcasting, voice-over work and vocal recording. Its supercardioid polar pattern focuses on the speaker while rejecting sound from the sides. The all-metal body and internal shock mount withstand daily studio use. An integrated humbucking circuit rejects electromagnetic interference for a cleaner signal.

Handles 135 dB SPL with 78 dB SNR

The capsule tolerates sound pressure levels up to 135 dB without clipping, so loud vocals or instruments stay clean. A signal-to-noise ratio of 78 dB keeps self-noise low during quiet passages. The supercardioid pattern and internal shock mount suppress handling noise and room reflections. No phantom power is required for operation.

XLR Connection with Included Stand Mount

The microphone terminates in a standard three-pin XLR connector for direct connection to any audio interface or mixer. A pivoting stand mount and threaded adapter are supplied in the box for quick positioning on a desk stand or boom arm. The rugged metal grille protects the capsule from accidental knocks. Buyers needing USB connectivity or wireless operation should consider other models.

Highlights

  • Broadcast-quality sound from large-diaphragm dynamic design
  • Supercardioid pattern rejects side noise for clean recordings
  • Handles 135 dB SPL without clipping or distortion
  • Internal shock mount isolates bumps and handling noise
  • All-metal body and grille built for daily use

Specifications

BrandZoom
ModelZDM-1
Part NumberZDM-1
ColorBlack
ConnectorXLR
Microphone Sensitivity135 decibels
Microphone Signal to Noise Ratio(SNR)78 decibels
FeaturesStand

Questions about this item

How do I attach the ZDM-1 to a stand without it coming loose?

Screw the included pivoting mount onto the microphone’s threaded base, then fasten the supplied adapter to your stand’s thread; tighten both by hand until the mic cannot rotate.

What part of the ZDM-1 will need attention after months of daily sessions?

The all-metal grille can collect moisture and dust; wipe it with a dry cloth and occasionally unscrew it to clear debris from the foam windscreen underneath.

At what volume does the ZDM-1 start to distort on loud vocals or instruments?

The capsule handles up to 135 dB SPL, so distortion only appears when the source exceeds that level — well above typical shouting or close-miked drums.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.