We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small metallic SFP transceivers with side labels

Zoom

Zoom SFP+ Transceiver 850 nm 300 m Lot of 2

SKU CH-PNQC-3H69C

Two 10 Gb/s SFP+ transceivers with 850 nm VCSEL emitters for 300 m multimode links

  • Device TypeTransceiver
  • Dual-rate 9.95 to 10.3 GBd supports 1 GbE and 10 GbE links
  • 850 nm VCSEL emitter reaches 300 m over OM3 multimode fibre
  • SFP+ form factor fits standard switch and router ports
  • Class 1 laser safety for compliant deployment
  • Lot of two transceivers for paired link installation

Dual SFP+ transceivers for 10 Gb links

This lot contains two SFP+ transceivers designed for 10 Gigabit Ethernet or Fibre Channel connections over multimode fibre. Each module uses an 850 nm VCSEL emitter to reach 300 metres on OM3 cabling. The dual-rate design supports 1 Gb and 10 Gb line rates for flexible deployment.

10.3 GBd maximum data rate

The transceivers operate from 9.95 GBd up to 10.3 GBd, covering standard 10GBASE-SR and 10G Fibre Channel speeds. This single rate window determines compatibility with your switch or host bus adapter ports. Verify that your equipment accepts SFP+ modules within this signalling range before purchase.

Low-power VCSEL operation

Class 1 laser rating means the 850 nm VCSEL emits within safe limits and draws minimal power during normal link activity. Heat output stays low inside a standard SFP+ cage, so no extra cooling is required. Acoustic noise is negligible because the modules have no moving parts.

Highlights

  • Dual-rate 9.95 to 10.3 GBd supports 1 GbE and 10 GbE links
  • 850 nm VCSEL emitter reaches 300 m over OM3 multimode fibre
  • SFP+ form factor fits standard switch and router ports
  • Class 1 laser safety for compliant deployment
  • Lot of two transceivers for paired link installation

Specifications

Device TypeTransceiver

Questions about this item

What does the 10.3 GBd maximum data rate mean once the module is installed in a switch?

The transceiver will carry 10 Gigabit Ethernet traffic at up to 10.3 GBd, matching the line rate of standard 10GBASE-SR links.

Which SFP+ interface standard does the module follow and what reach does it support?

It uses the SFP+ form factor with an 850 nm VCSEL and is rated for 300 m over OM3 multimode fibre.

What physical slot and fibre connector are required to mount the module?

The module plugs into an SFP+ cage and connects via a duplex LC patch cord.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.