We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zoeller M292 cast iron submersible sewage pump with vertical float switch

Zoeller

Zoeller M292 1/2 HP 115V Auto Submersible Sewage Trap

SKU CH-Y968-Q827E MPN M292

1/2 HP submersible sewage pump moves 120 gpm at 10 ft head with vertical float switch activating at 14 3/4 in on and 5 in off points

  • TypeDrain Components
  • 1/2 HP motor delivers 120 gpm at 10 ft head
  • Vertical float switch activates at 14 3/4 in on point
  • Hermetically sealed oil-filled motor ensures reliable operation
  • Cast iron body and impeller resist corrosion and wear
  • 115V single-phase power with 15.00 amp draw

1/2 HP Auto Sewage Pump

The Zoeller M292 is a 1/2 HP submersible sewage pump rated for 115V single-phase power. It uses a hermetically sealed, oil-filled motor with cast iron body and impeller for durability in residential or light commercial waste removal.

Vertical float switch installation

The pump includes an integral vertical float switch with fixed on point at 14 3/4 in and off point at 5 in. Install in a basin deep enough for this travel; a shallow pit will cause short cycling or failure to activate.

Basin depth and voltage check

Verify the basin provides at least 14 3/4 in of liquid depth for the switch to operate correctly. Confirm the supply circuit delivers 115V AC and can handle 15.00 A draw; the pump is restricted from sale in some states.

Highlights

  • 1/2 HP motor delivers 120 gpm at 10 ft head
  • Vertical float switch activates at 14 3/4 in on point
  • Hermetically sealed oil-filled motor ensures reliable operation
  • Cast iron body and impeller resist corrosion and wear
  • 115V single-phase power with 15.00 amp draw

Specifications

TypeDrain Components
BrandZoeller
ModelM292

Questions about this item

How do I verify the M292 is pumping correctly after installation?

Watch the float rise to 14 3/4 in to start the motor and fall to 5 in to stop it; at 10 ft head you should see about 120 gpm, at 20 ft head about 87 gpm.

What comes with the M292 and what must I supply?

The pump includes a hermetically-sealed oil-filled motor, cast-iron body and impeller, carbon-ceramic shaft seal and integral vertical float switch; you must supply 115 V power and 2 in discharge piping.

Which capacity suits a typical residential sewage basin?

The 1/2 HP 115 V model delivers 120 gpm at 10 ft head and 87 gpm at 20 ft head, matching common residential basin sizing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.