We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Submersible sump pump, cast iron body, 1-1/2 inch discharge, 9 foot cord

Zoeller

Zoeller E57 Submersible Sump Pump 3/10 HP 230V 1-1/2" Discharge

SKU CH-XR16-S9FDH MPN E57

A submersible sump pump that moves 34 gallons per minute at 10 feet of head and 19 gallons per minute at 15 feet, with a maximum head of 19 feet and a 1-1/2 inch discharge

  • TypeDrain Components
  • Moves 34 gpm at 10 ft head for fast water removal
  • Delivers 19 gpm at 15 ft head maintaining strong flow
  • Handles 1/2 in solids without clogging the impeller
  • Cast iron body and impeller resist corrosion for long life
  • Carbon ceramic shaft seal prevents leaks and extends service

3/10 HP 230V Cast Iron Sump Pump

The Zoeller E57 is a submersible sump pump rated at 3/10 horsepower and 230 volts AC. It moves up to 34 gallons per minute at 10 feet of head and 19 gallons per minute at 15 feet of head. The cast iron body and impeller house a carbon and ceramic shaft seal. A nine-foot power cord is included.

Basement drainage without integrated switch

This pump suits installations where a separate float or pressure switch will be provided by the installer. It requires a minimum pit diameter of 18 inches and passes solids up to one-half inch. It is not for systems needing an integrated float switch, for pits smaller than the stated minimum diameter, or for applications requiring a different supply voltage.

19-foot maximum head capacity

The pump develops a maximum head of 19 feet, which determines whether it can lift water to the required discharge elevation. At 4.8 amps and 60 hertz, the motor draws a specific current that the circuit must support. Verify the shut-off head against the total dynamic head of your piping before selecting this model.

Highlights

  • Moves 34 gpm at 10 ft head for fast water removal
  • Delivers 19 gpm at 15 ft head maintaining strong flow
  • Handles 1/2 in solids without clogging the impeller
  • Cast iron body and impeller resist corrosion for long life
  • Carbon ceramic shaft seal prevents leaks and extends service

Specifications

TypeDrain Components
BrandZoeller
ModelE57

Questions about this item

What size sump pit diameter is required for the E57 pump?

The pump needs a minimum sump pit diameter of 18 inches to fit and operate correctly.

How is the E57 pump installed and what step is often missed?

The pump is placed in the pit and connected to a 1-1/2 inch discharge pipe; a separate switch must be wired because no switch is included.

What maintenance will the E57 pump need over time?

The carbon and ceramic shaft seal may eventually wear and require replacement to prevent leaks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.