Zoeller
Zoeller 900-0002 Sump Pump 3/10HP Vertical Switch
A 3/10 HP sump pump with vertical float switch delivers 43.0 gpm at 5 ft head and includes an 18 in diameter basin holding 9.7 gal
- TypeDrain Components
- Removes water quickly with a 43.0 gpm flow rate at 5 ft head
- Handles moderate lift up to 19.0 ft maximum head
- Vertical float switch activates pump automatically as water rises
- Durable cast iron pump body resists corrosion for long service life
- 7 gallon polypropylene basin provides ample capacity for sump collection
Submersible Sump Pump System
The Zoeller 900-0002 is a submersible sump pump system rated at 3/10 horsepower for 120 V AC, 60 Hz operation. It includes a polypropylene basin measuring 18 inches in diameter by 22 inches high with a 9.7 gallon capacity. A vertical float switch with integral electrical connection provides automatic level control. The cast iron pump body and polypropylene impeller handle solids up to 1/2 inch.
Suitable For & Not Suitable For
This system suits installations needing a pre-assembled basin and pump package with automatic switching for residential sump or effluent removal. Buyers who need higher flow rates at greater lift or a larger basin volume should look at other configurations. It is not intended for applications requiring a different voltage, phase or switch type.
Deciding Specification
The maximum head of 19.0 feet and flow rates of 43.0 gpm at 5 feet, 34.0 gpm at 10 feet and 19.0 gpm at 15 feet of head determine whether this pump matches the site drainage demand.
Highlights
- Removes water quickly with a 43.0 gpm flow rate at 5 ft head
- Handles moderate lift up to 19.0 ft maximum head
- Vertical float switch activates pump automatically as water rises
- Durable cast iron pump body resists corrosion for long service life
- 7 gallon polypropylene basin provides ample capacity for sump collection
Specifications
| Type | Drain Components |
|---|---|
| Brand | Zoeller |
| Model | 900-0002 |
Questions about this item
What basin diameter and height does the 900-0002 system need to fit?
The included basin measures 18 in diameter and 22 in height, so the pit must accommodate those dimensions.
How is the vertical float switch wired on this pump, and what step is often missed?
The switch connection is integral to the pump; the common mistake is not securing the float arm so it moves freely without catching on the basin wall.
Which wear items on the 900-0002 will need replacement over time?
The polypropylene impeller and the vertical float switch mechanism are the primary components that wear and may require replacement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



