We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact steel utility pump with 6 ft power cord

Zoeller

Zoeller 311-0002 utility pump 115V AC 6 ft cord 1/10 hp 39 ft head

SKU CH-ZAWP-GDHBR

Self-priming utility pump with 1/10 hp motor, 115V AC power, 6 ft cord, 39 ft maximum head and 5.4 gph flow at 10 ft

  • Self-priming design simplifies start-up
  • 39 ft maximum head handles elevated discharge
  • 1/10 hp motor delivers 5.4 gph at 10 ft head
  • 6 ft cord on 115V AC plug powers standard outlets
  • Steel housing with nylon impeller resists wear

Zoeller 311-0002 utility pump 115V AC

The Zoeller 311-0002 is a self-priming utility pump rated at 1/10 hp and 115V AC. It moves up to 5.4 gph at 10 ft of head and reaches a maximum of 39 ft of head. A 6 ft cord and 3/4 in NPT discharge suit general transfer and dewatering tasks.

Sustained load behaviour

At 40 psi maximum operating pressure the pump maintains steady flow through its nylon impeller and steel housing. Self-priming action handles up to 15 ft of suction lift without manual repriming. The 1/10 hp motor runs continuously within its duty range without thermal trips.

Thermals noise and power

The 115V AC motor draws modest current and stays cool during typical cycles. Noise is limited to motor hum and water turbulence inside the steel housing. No external cooling or oversized supply is required for normal intermittent use.

Highlights

  • Self-priming design simplifies start-up
  • 39 ft maximum head handles elevated discharge
  • 1/10 hp motor delivers 5.4 gph at 10 ft head
  • 6 ft cord on 115V AC plug powers standard outlets
  • Steel housing with nylon impeller resists wear

Specifications

BrandZOELLER

Questions about this item

How much electricity does the 1/10 hp motor draw when the pump runs all day?

The motor is rated at 1/10 hp and operates on 115V AC; actual power draw depends on load and head pressure.

What fittings and hose are needed to connect the 3/4 in NPT discharge and 3/4 in MGHT intake?

You need a 3/4 in NPT male fitting for the discharge and a standard garden-hose thread (MGHT) connection for the intake, plus hose rated for up to 40 psi.

Will the 39 ft maximum head and 15 ft suction lift work with my existing 3/4 in plumbing?

Yes, the 3/4 in NPT discharge and MGHT intake match standard 3/4 in plumbing, and the pump delivers up to 5.4 gph at 10 ft of head.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.