We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC inline swing check valve with dual slip connections

Zoeller

Zoeller 30-0192 full flow check valve 1-1/4 or 1-1/2 slip PVC

SKU CH-QTHH-W4Y53

A PVC inline swing check valve with full-flow design, neoprene seal and 130 °F temperature rating for pump applications

  • Full flow design keeps discharge lines clear
  • Inline swing mechanism allows horizontal or vertical mounting
  • PVC body with neoprene seal handles water up to 130 degrees F
  • Rated for 4.30 psi maximum pressure at 130 degrees F
  • Fits 1-1/4 or 1-1/2 inch slip PVC connections

Full-flow inline swing valve

The Zoeller 30-0192 is a PVC check valve built for pump discharge lines. It accepts 1-1/4 in or 1-1/2 in slip connections and mounts horizontally or vertically. The inline swing mechanism provides full flow when open and a neoprene seal closes against a PVC seat to prevent backflow.

Thermals noise and power draw

This mechanical valve has no electrical components, so it generates no heat, noise or power draw during operation. The PVC body and neoprene seal are rated for continuous service up to 130 degrees F. Maximum water pressure is 4.30 psi at that temperature, and the valve carries no steam-pressure rating.

Replaces worn or missing check valves

Install this valve when an existing swing check on a pump line is leaking, stuck or absent. The dual slip-size design covers two common pipe diameters without bushings. It is not suited for systems that exceed 4.30 psi water pressure, require steam service or need a spring-loaded or silent-close mechanism.

Highlights

  • Full flow design keeps discharge lines clear
  • Inline swing mechanism allows horizontal or vertical mounting
  • PVC body with neoprene seal handles water up to 130 degrees F
  • Rated for 4.30 psi maximum pressure at 130 degrees F
  • Fits 1-1/4 or 1-1/2 inch slip PVC connections

Specifications

BrandZOELLER

Questions about this item

How do I install the 1-1/4 or 1-1/2 slip PVC connections and what step is often missed?

Solvent-weld each slip end to the pipe; the step often missed is allowing the cement to cure fully before pressurising the line.

What maintenance will the neoprene seal and PVC seat need later?

Inspect the neoprene seal and PVC seat annually for wear or debris; replace the seal if it no longer closes tightly against the seat.

What pressure limit appears first during sustained hot-water use at 130 degrees F?

The 4.30 psi maximum water pressure rating at 130 degrees F is the limiting factor under sustained high-temperature flow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.