We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zoeller 30-0101 PVC check valve with ball valve and union trap, inline swing design, compression by solvent weld connections

Zoeller

Zoeller 30-0101 Check Valve with Ball Valve and Union trap

SKU CH-MY2T-E6ES4 MPN 30-0101

A PVC inline swing check valve with integrated ball valve and union for pump discharge lines, rated to 130 °F and 25 psi

  • TypeDrain Components
  • Prevents backflow with inline swing check mechanism
  • Handles hot water up to 130 Degrees F
  • Rated for 25 psi maximum water pressure
  • Full-flow design maintains pump efficiency
  • Installs horizontally or vertically with compression and solvent weld connections

Inline Swing Check Valve

The Zoeller 30-0101 is an inline swing check valve with a PVC body and neoprene seal. It includes an integrated ball valve and union for straightforward installation. The assembly handles horizontal or vertical mounting orientations. It is designed for pump applications requiring backflow prevention.

Installers needing integrated isolation

This valve suits technicians who want a check valve and shut-off in one compact unit for sewage or effluent pumps. The compression-by-solvent-weld connections fit 2 in pipe without extra fittings. It is not for installers who need a higher pressure rating than 25 psi at 130 degrees F. It is not for systems that require a metal-bodied valve or a different connection type.

25 psi maximum working pressure

The valve is rated for 25 psi at 130 degrees F, which determines whether it matches the pump discharge pressure. Exceeding this limit risks seal failure and backflow. The neoprene seat and PVC construction set the temperature ceiling at 130 degrees F. Verify the system pressure and temperature before specifying this part.

Highlights

  • Prevents backflow with inline swing check mechanism
  • Handles hot water up to 130 Degrees F
  • Rated for 25 psi maximum water pressure
  • Full-flow design maintains pump efficiency
  • Installs horizontally or vertically with compression and solvent weld connections

Specifications

TypeDrain Components
BrandZoeller
Model30-0101

Questions about this item

What size pipe is required for the 2 in compression and solvent-weld connections?

The valve accepts 2 in pipe on both the compression and solvent-weld ends.

Can the 11 1/2 in length and 9 1/2 in width fit inside my existing sump basin?

Measure your basin opening; the valve body is 11 1/2 in long by 9 1/2 in wide.

How do I confirm the neoprene seal is holding at the 25 psi rating?

Pressurize the line to 25 psi and watch for pressure drop or leakage at the union.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.