We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC inline swing check valve, 9.625 in overall length, solvent weld ends

Zoeller

Zoeller 30-0044 Full Flow Check Valve 9.625 in

SKU CH-BXT5-7J63E MPN 30-0044

Inline swing check valve with PVC body, rubber seal and full-flow design for 3 in solvent-weld connections, rated to 50 psi at 130 °F

  • TypeDrain Components
  • Full-flow design prevents backflow in pump systems
  • 3 in solvent-weld connections fit standard PVC piping
  • Inline swing mechanism allows horizontal or vertical mounting
  • PVC body with rubber seal rated to 130 Degrees F
  • Stainless steel spring withstands up to 50 psi water pressure

Full-Flow Inline Check Valve

The Zoeller 30-0044 is a 3-inch solvent-weld check valve built for pump discharge lines. Its inline swing mechanism opens fully for unrestricted flow and closes automatically to prevent back-flow. The PVC body and rubber seal handle water up to 130 degrees Fahrenheit at 50 psi. It installs horizontally or vertically in residential and light-commercial plumbing systems.

Installers needing solvent-weld connections

This valve suits contractors and maintenance teams who require a 3-inch solvent-weld check valve for horizontal or vertical pump lines. It is not for installers who need threaded, flanged or compression connections. Buyers working with steam systems or pressures above 50 psi should select a differently rated component. The valve also does not fit pipe sizes other than 3 inches.

3-inch solvent-weld connection

The defining specification is the 3-inch solvent-weld by solvent-weld connection, which determines whether the valve matches the existing pipework. If the system uses a different diameter or joining method, this valve cannot be installed without adapters that are not included. Confirm the pipe size and joint type before ordering.

Highlights

  • Full-flow design prevents backflow in pump systems
  • 3 in solvent-weld connections fit standard PVC piping
  • Inline swing mechanism allows horizontal or vertical mounting
  • PVC body with rubber seal rated to 130 Degrees F
  • Stainless steel spring withstands up to 50 psi water pressure

Specifications

TypeDrain Components
BrandZoeller
Model30-0044

Questions about this item

How is the Zoeller 30-0044 installed and what step is often missed?

Solvent-weld both 3 in ends into the pipe run; the step often missed is applying primer before cement so the joint seals at the rated 50 psi.

What maintenance or replacement will the valve need later?

The rubber seal and stainless-steel spring inside the PVC body are the wear items; inspect them during pump service and replace if the flap no longer seats tightly.

What limit appears first under sustained hot-water use?

The 130 °F temperature ceiling; above it the PVC body and rubber seal lose their 50 psi pressure rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.