Zoeller
Zoeller 108-0001 Crawl Space System 3/10 HP 115 V 9.7 A trap
A 3/10 HP sump pump system with a 9.7-gallon polyethylene basin, 25-foot cord, and cast-iron pump body delivers up to 43.0 gpm at 5-foot head
- TypeDrain Components
- Efficient water removal with 43.0 gpm flow at 5 ft head
- Handles higher lifts delivering 34.0 gpm at 10 ft head
- Durable cast iron pump body resists corrosion in crawl spaces
- Automatic operation via integral vertical float switch
- 25 ft power cord allows flexible placement away from outlets
Crawl Space Sump Pump System
The Zoeller 108-0001 is a complete crawl space drainage system rated at 3/10 HP for 115 V operation. It uses a vertical float switch with an integral electrical connection to automate water removal. The pump body is cast iron with a polypropylene impeller and a carbon-ceramic shaft seal. A polyethylene basin is included for direct installation.
43.0 gpm at 5 ft head
The flow rate at 5 ft of head is 43.0 gpm, falling to 34.0 gpm at 10 ft and 19.0 gpm at 15 ft. Maximum shut-off head reaches 19.2 ft. These three points define whether the unit can overcome the static lift and friction losses in a specific crawl space layout. Match the duty point to the system curve before purchase.
9.7 gal basin with 25 ft cord
The polyethylene basin measures 12 1/5 in diameter by 10 7/8 in height and holds 9.7 gal. A 1-1/2 in FNPT discharge and a 25 ft power cord are factory-fitted. The cord length sets the maximum distance to a 120 V AC receptacle without an extension lead. California Proposition 65 warnings apply to this product.
Highlights
- Efficient water removal with 43.0 gpm flow at 5 ft head
- Handles higher lifts delivering 34.0 gpm at 10 ft head
- Durable cast iron pump body resists corrosion in crawl spaces
- Automatic operation via integral vertical float switch
- 25 ft power cord allows flexible placement away from outlets
Specifications
| Type | Drain Components |
|---|---|
| Brand | Zoeller |
| Model | 108-0001 |
Questions about this item
What does the 3/10 HP rating mean for actual water removal?
The 3/10 HP motor delivers 43.0 gpm at 5 ft head, 34.0 gpm at 10 ft head and 19.0 gpm at 15 ft head, with a maximum shut-off head of 19.2 ft.
How does the 1-1/2 in FNPT discharge limit the piping I can use?
The 1-1/2 in FNPT outlet accepts standard 1-1/2 in male NPT fittings; flow is capped by the pump curve at 43.0 gpm maximum.
What clearance does the 12 1/5 in diameter basin need for installation?
The polyethylene basin measures 12 1/5 in diameter by 10 7/8 in high and holds 9.7 gal, so allow at least that footprint plus space for the 25 ft cord and float travel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



