We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular biometric terminal with 5-inch colour screen, silver finish, fingerprint sensor and dual camera

ZKTECO

ZKTECO XFace600+ID Face Finger Scan RFID Card Small Business terminal

SKU CH-XANZ-8KBVP

A facial-recognition access terminal with fingerprint and RFID card authentication, storing up to 10,000 users and 100,000 records on a 5-inch colour screen

Models: Select xFace600+ID

Struck-through versions exist but are not stocked here.

  • Identify staff in 0.5 seconds with visible-light facial recognition
  • Store up to 10,000 users across face, fingerprint and card modes
  • Log 100,000 events for complete attendance and access records
  • Operate reliably from 0 to 45 °C and 20 to 80 % humidity
  • Mount easily with compact 203 × 92 × 22.5 mm design

Access control terminal for small business

The ZKTeco XFace600+ID combines face, fingerprint and RFID card authentication in one unit designed for small business environments. It stores up to 10000 users for each biometric type and holds 100000 event records. A 5-inch colour touchscreen provides a clear interface for enrolment and daily check-in.

Visible-light recognition with standard interfaces

Megapixel binocular cameras enable 0.5s dynamic identification at a distance for hands-free door release. The Linux-based terminal includes Wiegand input and output plus connectors for door magnet and alarm, supporting direct integration with existing access control hardware. Power is supplied through a DC12V 3A source.

Environmental and mounting limits

Operation is rated from 0 to 45 degrees Celsius at 20 to 80 percent humidity. The compact 203 by 92 by 22.5 millimetre housing suits wall mounting in reception areas or corridors. Buyers who need outdoor-rated ingress protection or larger user databases should verify suitability before deployment.

Highlights

  • Identify staff in 0.5 seconds with visible-light facial recognition
  • Store up to 10,000 users across face, fingerprint and card modes
  • Log 100,000 events for complete attendance and access records
  • Operate reliably from 0 to 45 °C and 20 to 80 % humidity
  • Mount easily with compact 203 × 92 × 22.5 mm design

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What communication standard does the XFace600+ID use and what limits its network speed in practice?

The terminal uses TCP/IP for wired networking; the practical speed is capped by the 10/100 Ethernet port on the device.

What physical space and mounting provisions does the 203 x 92 x 22.5 mm unit need?

It requires a flat wall area of at least 203 mm wide by 92 mm high with a 22.5 mm depth clearance and uses four screw holes on the rear bracket for secure mounting.

How is the XFace600+ID installed and which wiring step do installers most often get wrong?

Mount the bracket, connect DC12V 3A power and the TCP/IP cable, then attach the door lock, exit button and sensor to the Wiegand and relay terminals; the step most often missed is reversing the NO/NC relay wires for the specific lock type.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.