ZKTECO
ZKTeco SC700+IC time clock access controller
Time clock and access controller for 30,000 users with colour touchscreen, TCP/IP and U-disk data transfer
Model: Select SC700+IC
- SC700+ID
- SC700+IC
- SC700+WiFi
- SC700+ADMS
- Stores 30,000 users for large organisations
- Holds 100,000 records to simplify audit trails
- Connects via TCP/IP for instant network integration
- Colour touchscreen enables intuitive on-device operation
- Operates reliably from 0 to 45 °C
Purpose and users
The ZKTeco SC700+IC is a networked time-clock and access controller designed for offices that need to track up to 30,000 employees and store 100,000 event records. It suits administrators who want colour-screen feedback and multiple verification methods without a dedicated server.
Build and connectivity
The unit measures 104.8 by 160 by 36 millimetres and fits standard wall mounting. A colour touchscreen replaces the monochrome panels common on similar readers, while TCP/IP and USB ports handle network integration and offline data collection. Wiegand in and out terminals allow direct lock, alarm and door-sensor wiring.
Thermals and power
Operating range is 0 to 45 degrees Celsius at 20 to 80 percent humidity. The device draws power from a 12 volt three amp supply, so heat output and fan noise remain minimal in typical indoor installations.
Highlights
- Stores 30,000 users for large organisations
- Holds 100,000 records to simplify audit trails
- Connects via TCP/IP for instant network integration
- Colour touchscreen enables intuitive on-device operation
- Operates reliably from 0 to 45 °C
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
ZKTECO SC700+WiFi WIFI TCP/IP Clock USB 125Khz RFID Card Door Access Control
ZKTECO SC700 RFID Card Reader 125KHz TCP/IP SC700+ADMS office equipment
Questions about this item
What network interface does the SC700+IC use and what does it cap in practice?
The unit connects through TCP/IP, so the practical limit is the bandwidth and latency of the wired LAN it plugs into.
What are the exact dimensions for mounting the SC700+IC on a wall or door frame?
The device measures 104.8 mm wide, 160 mm high and 36 mm deep, so the cut-out or bracket must accommodate that footprint.
How is the SC700+IC powered and wired during installation, and which step is often missed?
It requires a 12 V 3 A supply; the step frequently missed is connecting the Wiegand IN/OUT, door magnet, lock and alarm wires to the terminal block before sealing the enclosure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
AT&T CL2940 corded phone with caller ID and speakerphone
- Black
- 1-line Operation








