We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular white terminal with 4-inch touch screen and dual camera module

ZKTECO

ZKTeco nFace128+WIFI facial fingerprint access control terminal

SKU CH-CHYR-N7KM6

A facial, fingerprint and IC-card access terminal with a 4-inch touch screen that stores 1000 users and 100000 records, connects via TCP/IP or optional WiFi, and runs on DC12V 3A power

Opotion: Select nFace128+WIFI

  • Four-mode verification covers face, fingerprint, card and password
  • Binocular camera auto-adjusts fill light for reliable recognition in low light
  • 100,000 event records and 1,000 users suit mid-size workforces
  • TCP/IP with optional WiFi gives flexible network deployment
  • 4-inch touch colour screen simplifies on-device enrolment and management

Facial Fingerprint Access Terminal

The ZKTeco nFace128+WIFI is a 4-inch touch-screen terminal that combines visible-light facial recognition, fingerprint scanning and IC-card verification for employee time attendance and door access control. It suits small-to-medium businesses needing a single device to manage up to one thousand users with multiple credential options.

Upgrading From Standalone Readers

The terminal replaces separate card readers, fingerprint scanners or basic keypads by merging three authentication modes and TCP/IP connectivity into one unit. The jump is worthwhile when an organisation wants centralised record keeping, Wiegand output for existing controllers and optional Wi-Fi for sites where cabling is impractical.

Capacity And Operational Limits

Storage handles one thousand faces, one thousand fingerprints, one thousand cards and one hundred thousand event logs, covering typical SME workforces with ample headroom. Operation is rated from zero to forty-five degrees Celsius and up to ninety-five percent humidity, so extreme cold, outdoor heat or condensing environments fall outside the supported range.

Highlights

  • Four-mode verification covers face, fingerprint, card and password
  • Binocular camera auto-adjusts fill light for reliable recognition in low light
  • 100,000 event records and 1,000 users suit mid-size workforces
  • TCP/IP with optional WiFi gives flexible network deployment
  • 4-inch touch colour screen simplifies on-device enrolment and management

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What are the exact dimensions of the nFace128+WIFI terminal so I can check wall-mount clearance?

The unit measures 192.5 mm tall, 80.5 mm wide and 19.2 mm deep, so verify your mounting bracket and cable routing space against those figures.

Does the terminal connect to the network over Wi-Fi out of the box, or is a cable required first?

Wi-Fi is optional; the default interface is TCP/IP, so plan to run an Ethernet cable for initial setup unless you have ordered the Wi-Fi module.

How often will the 12 V 3 A power supply need replacement in continuous use?

The DC 12 V 3 A adapter is a standard replaceable part; keep a spare on hand and swap it if the terminal shows intermittent power loss or fails to boot.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.