We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Wall-mounted biometric terminal with 2.8-inch color screen and dual camera lens

ZKTECO

ZKTECO MultiBio800 Face Fingerprint Time Attendance Access Control Terminal

SKU CH-JK96-BBHKR

Face and fingerprint time attendance terminal with 400 face capacity, 1000 fingerprint templates and 100000 transaction storage

Models: Select MultiBio800 Standard

  • Verifies faces in seconds with ZKFace 7.0 algorithm
  • Stores 400 faces and 1,000 fingerprints for large teams
  • Works in darkness via infrared night-vision camera
  • Controls doors with anti-passback and 3rd-party lock support
  • Connects over TCP/IP, RS485 and USB-host

Purpose & Audience

The ZKTECO MultiBio800 is a time attendance and access control terminal designed for workplaces that require biometric verification. It supports face and fingerprint recognition with optional RFID card authentication. The device suits small to medium businesses needing a standalone unit to manage employee clock-ins and door entry.

Upgrade Path

This terminal replaces older single-factor clocks such as basic card readers or keypad-only units by adding dual biometric modes and a 2.8 inch colour display. The jump is worthwhile when an organisation needs to eliminate buddy punching, store up to 400 face templates and 1000 fingerprint templates, or log up to 100000 transactions locally before offloading data.

Pre-Installation Checklist

Verify that a 12V DC 3A power source is available at the mounting location and that the ambient temperature stays between 0 °C and 45 °C with humidity from 20% to 80%. Confirm the site can run RS485 or TCP/IP cabling for network integration and that any third‑party electric lock, door sensor, exit button, alarm or doorbell matches the access control interface. Ensure the optional ID or Mifare card module is ordered if card verification is required.

Highlights

  • Verifies faces in seconds with ZKFace 7.0 algorithm
  • Stores 400 faces and 1,000 fingerprints for large teams
  • Works in darkness via infrared night-vision camera
  • Controls doors with anti-passback and 3rd-party lock support
  • Connects over TCP/IP, RS485 and USB-host

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What are the power supply requirements for the ZKTECO MultiBio800 terminal?

The terminal operates on a 12V DC, 3A power supply. Ensure the power adapter matches these specifications exactly for reliable operation.

How do I connect the MultiBio800 to the network and what common wiring step is missed?

Connect via TCP/IP using an Ethernet cable to your router or switch. Configure the IP address in the device menu to match your network subnet. The step often missed is setting the correct gateway and subnet mask, which prevents communication across internet segments.

What maintenance does the infrared night vision system need over time?

Keep the infrared optical lenses and color duo camera clean from dust and debris using a soft, dry cloth. Avoid harsh chemicals. The infrared night vision light enables verification in dark environments, so clear optics are essential for consistent performance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.